8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 9.5mm for sale/trade/wanted   » Bolex/Paillard G916 spares

 - UBBFriend: Email this page to someone!    
Author Topic: Bolex/Paillard G916 spares
Brian Collins
Film Handler

Posts: 96
From: Christchurch UK
Registered: Jan 2007


 - posted April 04, 2012 04:29 PM      Profile for Brian Collins     Send New Private Message       Edit/Delete Post 
I have a Bolex/Paillard G916 that has had the resistance knob and the adjuster in the lamphouse removed for some reason and am looking to purchase spare parts or complete machine for spares to put this right as without it I have no control over the ampmeter, any help would be appreciated, also require a transformer for it.

 |  IP: Logged

Peter James Diggle
Junior
Posts: 24
From: Oxford, UK
Registered: Mar 2009


 - posted April 09, 2012 10:06 AM      Profile for Peter James Diggle   Email Peter James Diggle   Send New Private Message       Edit/Delete Post 
A friend has a PB G16 which has an electrical fault which he wants to dipose of. He is happy to be contacted on Oxford 01865 510294. Hope you are able to help each other with this.His name is Kumar Hussein.

--------------------
PJDiggle

 |  IP: Logged

Brian Collins
Film Handler

Posts: 96
From: Christchurch UK
Registered: Jan 2007


 - posted April 16, 2012 02:56 AM      Profile for Brian Collins     Send New Private Message       Edit/Delete Post 
Thank you Peter, Have been in touch with Kumar and will be seeing him later, best regards.

 |  IP: Logged

Alwyn Jones
Junior
Posts: 6
From: Yorkshire, UK
Registered: Apr 2012


 - posted May 03, 2012 09:00 AM      Profile for Alwyn Jones     Send New Private Message       Edit/Delete Post 
Brian
I have aquired a Bolex G3 needing 16mm/8mm bits. Now runs 9.5mm but with Dallmeyer projection lens which is only suitable for 8mm. Should your newly aquired projector have a 16mm suitable lens and/or sprockets/gate etc - spare & surplus to your requirements, I would be interested in a purchase.

 |  IP: Logged

Brian Collins
Film Handler

Posts: 96
From: Christchurch UK
Registered: Jan 2007


 - posted May 03, 2012 10:43 AM      Profile for Brian Collins     Send New Private Message       Edit/Delete Post 
Alwyn
Mine is also a G916 and it hase a Dallmeyer f50 lens but will see what the other one I am obtaining shortly is and will keep in touch.

 |  IP: Logged

Alwyn Jones
Junior
Posts: 6
From: Yorkshire, UK
Registered: Apr 2012


 - posted May 03, 2012 11:20 AM      Profile for Alwyn Jones     Send New Private Message       Edit/Delete Post 
Much obliged, Brian. Missed an 8/16 - sold as faulty - on ebay last week, would have been perfect for my missing bits.
Many thanks, sorry for being cheeky - if you don't ask, you don't get.

 |  IP: Logged

Brian Collins
Film Handler

Posts: 96
From: Christchurch UK
Registered: Jan 2007


 - posted May 03, 2012 11:33 AM      Profile for Brian Collins     Send New Private Message       Edit/Delete Post 
Yes. That 816 was good as it had the complete set of change overs and gate, if I had not made a promise on another one I would have been tempted. Never mind something else will come along.
Brian

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2