8mm Forum: Some help needed.

»	8mm Forum » 8mm Forum » Some help needed.

UBBFriend: Email this page to someone!

Author

Topic: Some help needed.

Kevin Faulkner
Film God

Posts: 4071
From: Essex UK
Registered: Jun 2003

posted January 25, 2004 09:09 AM

Yes even I need some help sometimes [Wink]

Seriously though I am trying to find replacement Din Speaker socket for the back of one of my GS 1200's. The socket is one of the chassis mounting types but is switched so that the internal speakers are muted when the plugs are inserted.
On mine the switched part has gone intermittent so that one of the speakers doesnt allways produce sound. [Frown]

temporarily I have shorted the socket out so that the speaker will work but I want to get the socket replaced full stop.
I have tried all the outlets in the UK I can think of but can only find the non-switched version. Does anyone know of a source of switched sockets in the US for instance. The switched version has 3 contacts on the rear and the non-switched has 2.
Any help would be welcome. [Smile]

Thanks, Kev.

--------------------
GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.

| IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003

posted January 25, 2004 10:49 AM

Hi Kevin,
Try contacting Leon Norris "Mr. Elmo USA" at 610-275-1225. He carries quite a few spare items for the GS1200. Leon is a really great guy, very knowledgeable about the GS1200, like yourself. One word of warning though Kevin, Leon loves to talk! I can usually plan on a 45 minute conversation every time I order a part from him. So be forwarned as you will be placing an international call on exorbitant BT rates!

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

| IP: Logged

Kevin Faulkner
Film God

Posts: 4071
From: Essex UK
Registered: Jun 2003

posted January 25, 2004 02:37 PM

Thanks Paul, I take it that Leon doesnt have email then?

Kev.

--------------------
GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.

| IP: Logged

David Park
Master Film Handler

Posts: 346
From: UK
Registered: Nov 2003

posted January 25, 2004 03:35 PM

Have you tried RS Components or Farnells ?

--------------------
Regards,
David

| IP: Logged

Kevin Faulkner
Film God

Posts: 4071
From: Essex UK
Registered: Jun 2003

posted January 25, 2004 03:43 PM

Yes David, along with Maplin and a number of others. Everyone sells the std nonswitched version but not the switched.

Thanks, Kev.

--------------------
GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.

| IP: Logged

Paul Adsett
Film God

Posts: 5003
From: USA
Registered: Jun 2003

posted January 25, 2004 03:54 PM

Kev,
No, unfortunately Leon does not have email-I don't think he has much, if any, interest in computers. It would be great if he would partake in this forum, but I don't think that will happen. If you call him, you will usually get his answering service. This would work out good for you though Kev , as you could leave a quick message about your problem, and get back to Leon a few hours later after he has had time to research the issue and see if he has the parts, thus limiting your phone bill. Leon might even call you back from this side of the pond! I will send you Leon's adress offline, in case you want to write to him.

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

| IP: Logged

Tim Christian
Expert Film Handler

Posts: 219
From: Norfolk, UK
Registered: Jun 2003

posted January 26, 2004 01:37 AM

Kevin, I've got a couple of used switched DIN sockets. Do you need the mono or stereo version? Let me have your address and I'll put one in the post.

--------------------
Tim

| IP: Logged

Kevin Faulkner
Film God

Posts: 4071
From: Essex UK
Registered: Jun 2003

posted January 26, 2004 07:06 AM

Hello Tim,
Good to hear from you. I will get back to you with address etc off the forum. [Wink]

Cheers, Kev.

--------------------
GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2