8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » LAMP FOR EUMIG MARK S

- UBBFriend: Email this page to someone!    
Author Topic: LAMP FOR EUMIG MARK S
Martyn Bennett
Junior
Posts: 13
From: Redditch Worcestershire
Registered: Sep 2004

- posted January 05, 2008 01:59 PM      Profile for Martyn Bennett   Email Martyn Bennett   Send New Private Message       Edit/Delete Post 
Hi i have a EUMIG Mk s projector the only info on the lamp enclosure states 100w, is it going to be 12 volt ?
Thanks Martyn.

 |  IP: Logged
David Roberts
Master Film Handler

Posts: 405
From: Suffolk. England
Registered: Apr 2004

- posted January 05, 2008 02:13 PM      Profile for David Roberts     Send New Private Message       Edit/Delete Post 
martyn
if its the original mk s, its the ai/215,this is 12v as you suggest and is still easy to obtain.

 |  IP: Logged
Martyn Bennett
Junior
Posts: 13
From: Redditch Worcestershire
Registered: Sep 2004

- posted January 05, 2008 02:22 PM      Profile for Martyn Bennett   Email Martyn Bennett   Send New Private Message       Edit/Delete Post 
Thanks for that David.

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2