8mm Forum
Topic Closed  Topic Closed


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » S710D

- UBBFriend: Email this page to someone!    
Author Topic: S710D
Brian Collins
Film Handler

Posts: 96
From: Christchurch UK
Registered: Jan 2007

- posted January 18, 2008 05:13 PM      Profile for Brian Collins     Send New Private Message       Edit/Delete Post 
Hi David, Yes I am using the correct sprockets and gate and it has been working fine then all of a sudden it tore little slots in the perferations and can find no reason for it, thanks for your input.
Brian

 |  IP: Logged
Douglas Meltzer
Moderator

Posts: 4554
From: New York, NY, USA
Registered: Jun 2003

- posted January 18, 2008 06:32 PM      Profile for Douglas Meltzer   Email Douglas Meltzer   Send New Private Message       Edit/Delete Post 
Brian,

Please post your reply to David in your original thread, "Eumig S710D". No need to start a new one.
Good luck with your projector!

Doug

--------------------
I think there's room for just one more film.....

 |  IP: Logged


All times are Central  
   Open Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2