8mm Forum: Elmo Dual 8mm/Super 8mm projector

»	8mm Forum » 8mm Forum » Elmo Dual 8mm/Super 8mm projector

UBBFriend: Email this page to someone!

Author

Topic: Elmo Dual 8mm/Super 8mm projector

Myron Baron
Film Handler

Posts: 49
From: Easton, Pa 18045
Registered: Jan 2008

posted April 08, 2008 08:50 AM

I just purchased and Elmo Dual 8mm/Super8mm projector off E-Bay, it looks in pretty good physical condition. Except it is missing the drive belts, the one that drives the blade, and also the the one for the reels. The Model is a VP.C. Does anyone know were I can purchase these two drive belts? Also I would like to purchase a repair manual for this projector. Your help would be greatly appreciated.
Thank you
Myron Baron

| IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003

posted April 08, 2008 08:57 AM

For the belts try this seller:

http://myworld.ebay.com/isellprojectorbelts

He's well known around here and people are happy with his products.

--------------------
All I ask is a wide screen and a projector to light her by...

| IP: Logged

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004

posted April 08, 2008 06:25 PM

Steve (or anyone),
I think I used his services to get some belts for an Elmo and they were fine, but can you recall if he ever sells belts for a Eumig 824? I don't think I've ever seen anyone offer these.

--------------------
Adrian Winchester

| IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003

posted April 08, 2008 07:40 PM

Hi Adrian,

I'm not sure if he does, but I've asked for belts not on his list before and was pleasantly surprised.

-no harm asking!

I consider Paul Adsett "Mr. Eumig".

-What do you think, Paul?

--------------------
All I ask is a wide screen and a projector to light her by...

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2