8mm Forum: Eumig S912 GL

»	8mm Forum » 8mm Forum » Eumig S912 GL

UBBFriend: Email this page to someone!

Author

Topic: Eumig S912 GL

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted May 30, 2008 02:38 AM

Does anyone know how to remove the lens assembly on this projector?

--------------------
Maurice

| IP: Logged

Michael Beyer
Expert Film Handler

Posts: 233
From: Bingen, Germany
Registered: Apr 2008

posted May 30, 2008 02:47 AM

Hi Maurice,
my english is not very good, so I hope you will understand me.

On my Eumig 934 I remove the lens as follow:
- Turn the knob against clockwise
- Press a little bit against the lens from the front
- Now turn the knob 1-2mm again against the clockwise
- Then you can take out the lens.

Regards,
Michael

P.S.: I hope you know what I mean [Confused]

--------------------
Just remember the time when Home Cinema was not a disc...keep perforated

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted May 30, 2008 04:06 AM

Michael

Thank you. Your English is very good, however, I am not sure by your use of the word "against".

You say "Turn the knob against clockwise." I assume you mean "anti-clockwise". For example, the opposite way to clockwise.

Do I push the lens inwards? Towards the projector?

I assume to put the lens back into the projector all the above is done in reverse.

Your help is appreciated.

--------------------
Maurice

| IP: Logged

Michael Beyer
Expert Film Handler

Posts: 233
From: Bingen, Germany
Registered: Apr 2008

posted May 30, 2008 04:12 AM

Hi Maurice,

yes, I mean "anti-clockwise" the "Focus-knob".
The lens must be pushed towards the projector, but just a little bit !
And yes, the whole action in reverse to put it back.

--------------------
Just remember the time when Home Cinema was not a disc...keep perforated

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted May 30, 2008 04:26 AM

Michael

Thank you for clearing this up. You have been most helpful.

--------------------
Maurice

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2