8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Elmo St 1200 ground noise problem?

 - UBBFriend: Email this page to someone!    
Author Topic: Elmo St 1200 ground noise problem?
Robert Oakley
Film Handler

Posts: 46
From: Binghamton, NY
Registered: Dec 2003


 - posted September 29, 2008 10:25 PM      Profile for Robert Oakley   Email Robert Oakley   Send New Private Message       Edit/Delete Post 
It sounds like a ground wire is broken, checking the amplifer, I not showing and sign of broken wires. Has anyone else encountered this?

 |  IP: Logged

Chip Gelmini
Phenomenal Film Handler

Posts: 1733
From: Brooksville, FL
Registered: Jun 2003


 - posted September 29, 2008 11:24 PM      Profile for Chip Gelmini   Email Chip Gelmini   Send New Private Message       Edit/Delete Post 
Maybe it is something else on your system. Check all other devices for something that is not grounded, and/or outlets that are not grounded.

 |  IP: Logged

Robert Oakley
Film Handler

Posts: 46
From: Binghamton, NY
Registered: Dec 2003


 - posted October 01, 2008 10:41 PM      Profile for Robert Oakley   Email Robert Oakley   Send New Private Message       Edit/Delete Post 
Thanks for the advice chip but it didn't help in my case. The amp says STK 106 power amp, is that normal for the st1200? I googled that term and got a bunch of matches for STK and Amplifiers. Any advice would be appreciated.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2