8mm Forum: Elmo VP-A dual filmatic

»	8mm Forum » 8mm Forum » Elmo VP-A dual filmatic

UBBFriend: Email this page to someone!

Author

Topic: Elmo VP-A dual filmatic

Robert Tucker
Jedi Master Film Handler

Posts: 688
From: Essex, UK
Registered: May 2005

posted March 15, 2009 07:06 AM

Wondered if any one can help me out on this one. I am trying to locate replacement belts for a Elmo VP-A dual filmatic. I need the main motor belt and the drive belt for the spindle arms to work.

Best,

Rob.

| IP: Logged

Josef Grassmann
Expert Film Handler

Posts: 190
From: Hennef-Sieg, Germany
Registered: Apr 2005

posted March 15, 2009 01:06 PM

We have both belts in stock.

| IP: Logged

Robert Tucker
Jedi Master Film Handler

Posts: 688
From: Essex, UK
Registered: May 2005

posted March 15, 2009 05:23 PM

If you can let me know what the cost will be and if you accept payment via Paypal.

| IP: Logged

Philip Cooke
Junior
Posts: 5
From: Marlow, Bucks, UK
Registered: Feb 2010

posted February 21, 2010 04:03 PM

Resurecting a thread form almost a year ago - I'm also in need of a set of belts and a diagram that shows how to connect it up as I can't quite work it out! I've found another thread with a pikkie which has got me half way there but I need a functional diagram or a few more photos.
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004928#000000
I've sent an email to Josef Grassmann on 1 Feb but no answer so far.

| IP: Logged

Philip Cooke
Junior
Posts: 5
From: Marlow, Bucks, UK
Registered: Feb 2010

posted July 14, 2011 02:56 PM

Another bounce from well over a year ago. I'm still looking for advice and I'll try pm'ing Josef again but if anyone else can help I'd be very grateful

| IP: Logged

William Fleming
Master Film Handler

Posts: 319
From: United Kingdom
Registered: Jul 2011

posted July 14, 2011 03:02 PM

Philip ive sent you a message that might help

| IP: Logged

Graham Ritchie
Film God

Posts: 4001
From: New Zealand
Registered: Feb 2006

posted July 15, 2011 04:58 AM

Check out Topic "Elmo VP-C Belt Configuration" from July 17th 2009, that might help.

Graham.

| IP: Logged

Philip Cooke
Junior
Posts: 5
From: Marlow, Bucks, UK
Registered: Feb 2010

posted July 16, 2011 05:48 AM

Thanks all, yes I've seen the VP-C configuration and will use that as a guide
http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=004699#000000
I've now spoken to Tony at Buckingham Film services and he has put me onto John White at www.the8mmshedshop.co.uk who is able to supply me with the belts.

Just need to buy, fit and test them now!

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2