8mm Forum


Post New Topic  Post A Reply
my profile | my password | register | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Are the belts for Sankyo 600 and 700 the same size?

 - UBBFriend: Email this page to someone!    
Author Topic: Are the belts for Sankyo 600 and 700 the same size?
Paul Brandes
Film Handler

Posts: 61
From: Australia
Registered: May 2010


 - posted October 12, 2010 08:03 PM      Profile for Paul Brandes   Email Paul Brandes   Send New Private Message       Edit/Delete Post 
Hi,

Could anyone please tell me if the belts for a Sankyo 700 will fit on a Sankyo 600 projector.
I was told that the 600 had a completely different set and just wanted to verify this. I would be grateful for any help with this.

Thank you

Regards

Paul

 |  IP: Logged

Barry Fritz
Phenomenal Film Handler

Posts: 1058
From: Burnsville, MN, USA
Registered: Dec 2009


 - posted October 13, 2010 02:13 PM      Profile for Barry Fritz   Email Barry Fritz   Send New Private Message       Edit/Delete Post 
PAUL: I'm not sure, but if you could email Mark, he may be able to tell you. He sells belts on Ebay for almost any projector you can imagine. His email is: projectorbelts@mchsi.com

 |  IP: Logged

Paul Brandes
Film Handler

Posts: 61
From: Australia
Registered: May 2010


 - posted October 13, 2010 02:39 PM      Profile for Paul Brandes   Email Paul Brandes   Send New Private Message       Edit/Delete Post 
Hi Barry

Many thanks. I will email Mark

Regards

Paul

 |  IP: Logged

Maurizio Di Cintio
Jedi Master Film Handler

Posts: 976
From: Ortona, Italy
Registered: Jan 2004


 - posted October 14, 2010 05:10 AM      Profile for Maurizio Di Cintio   Email Maurizio Di Cintio   Send New Private Message       Edit/Delete Post 
I suspect the 600 is different from the 700, too.
But FYI, on the more modern Sankyo's (eg 301, 401, 501, 700 & 800) a common O-ring of suitable diameter will do the job flawlessly at a much lower price.

--------------------
Maurizio

 |  IP: Logged

Paul Brandes
Film Handler

Posts: 61
From: Australia
Registered: May 2010


 - posted October 14, 2010 01:55 PM      Profile for Paul Brandes   Email Paul Brandes   Send New Private Message       Edit/Delete Post 
Hi Maurizio

Many thanks

Regards

Paul

 |  IP: Logged



All times are Central  
Post New Topic  Post A Reply Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2