8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Bolex sound clarification

 - UBBFriend: Email this page to someone!    
Author Topic: Bolex sound clarification
Akshay Nanjangud
Jedi Master Film Handler

Posts: 637
From: Dallas, TX
Registered: Nov 2011


 - posted December 09, 2011 02:31 PM      Profile for Akshay Nanjangud   Email Akshay Nanjangud   Send New Private Message       Edit/Delete Post 
Hi,

I was reading the instructions on cleaning the sound head of my Bolex (the steps for a similar Eumig) in one of the replies here:

http://8mmforum.film-tech.com/cgi-bin/ubb/ultimatebb.cgi?ubb=get_topic;f=1;t=006100

and couldn't understand how to "unplug the sound head", point 4. Specifically, what does 'unplug' mean?

Again in point 4, which 'single screw' connects the sound head to the chassis? There is a photo with an arrow in the previous reply. Is the 'single screw' the one the arrow points to that needs to be removed?

If I understand these steps, I can move on. Thanks in advance. :-)

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2