8mm Forum: Eumig P8 Novo

»	8mm Forum » 8mm Forum » Eumig P8 Novo

UBBFriend: Email this page to someone!

Author

Topic: Eumig P8 Novo

John Seymour
Junior
Posts: 2
From: Ely Cambridgeshire UK
Registered: Jan 2013

posted January 20, 2013 11:05 AM

Hi
I am brand new to this site and would appreciate some help with the removal of the drive motor as it squeals when it is running.
The brushes look OK, but the comm segments are tarnished.
I have removed the transformer, but I am unsure of what to undo next to get at the motor.
I have turned the motor by hand and it feels lumpy and seems to be catching the fan case. I presume there is some end float on the motor when it is set up correctly.
I have taken several pictures to aid with reassembly.
Kind regards
John

| IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010

posted January 20, 2013 11:15 AM

Hi John

WELCOME TO THE FORUM!!!!

If you can send the pics to my email I can help you. I have worked on these in the past but don't have one now to look at. I need my memory refreshed [Confused]

PatD

| IP: Logged

John Seymour
Junior
Posts: 2
From: Ely Cambridgeshire UK
Registered: Jan 2013

posted January 20, 2013 11:45 AM

Hi Pasquale

Many thanks for your welcome message and quick reply
I hope the photos will be of help.
Kind regards
John

| IP: Logged

Alexander Lechner
Expert Film Handler

Posts: 118
From: Leoben, Austria
Registered: Apr 2009

posted January 21, 2013 02:40 AM

Welcome to the forum John!
If the fan is catching its case, you should check the following: on the motor housing are rubber "distance holders". As the rubber is about 60 years old now it is not elastic anymore and it has given way over time. So the motor is not exactly in the position it is supposed to be and as the fan is on the motor axis it has moved out of position as well and is touching its case.
The only solution is to change the rubber parts.
I have the same problem with a P8 that I inherited of my grandparents. I haven't repaired the projector yet, so unfortunately I can not give you advice how to do it exactly.

--------------------
Alex

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2