8mm Forum


Post New Topic  Post A Reply
my profile | my password | register | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Eumig 810 part needed

 - UBBFriend: Email this page to someone!    
Author Topic: Eumig 810 part needed
Gary Huggins
Film Handler

Posts: 40
From: Kansas City, MO, USA
Registered: Sep 2013


 - posted March 13, 2014 08:22 PM      Profile for Gary Huggins   Email Gary Huggins   Send New Private Message       Edit/Delete Post 
I would appreciate any suggestions about where to find a part for a recently acquired Eumig 810.

It arrived missing one half of the tiny plastic split rollers in the compartment that feeds the take-up reel.

Thanks!

 |  IP: Logged

Zechariah Sporre
Jedi Master Film Handler

Posts: 550
From: Ladysmith, WI U.S.A.
Registered: Dec 2010


 - posted March 14, 2014 08:56 AM      Profile for Zechariah Sporre   Email Zechariah Sporre   Send New Private Message       Edit/Delete Post 
I have one. If you send me your address I will send it to you.

--------------------
There is a fine line between a hobby and a mental illness

 |  IP: Logged

Gary Huggins
Film Handler

Posts: 40
From: Kansas City, MO, USA
Registered: Sep 2013


 - posted March 14, 2014 12:46 PM      Profile for Gary Huggins   Email Gary Huggins   Send New Private Message       Edit/Delete Post 
Thanks!

 |  IP: Logged

Bill Brandenstein
Phenomenal Film Handler

Posts: 1624
From: California
Registered: Aug 2007


 - posted March 15, 2014 09:35 PM      Profile for Bill Brandenstein   Email Bill Brandenstein   Send New Private Message       Edit/Delete Post 
I'm missing two halves on a spare machine. Got any more, Zechariah? [Smile]

 |  IP: Logged

Zechariah Sporre
Jedi Master Film Handler

Posts: 550
From: Ladysmith, WI U.S.A.
Registered: Dec 2010


 - posted March 15, 2014 10:04 PM      Profile for Zechariah Sporre   Email Zechariah Sporre   Send New Private Message       Edit/Delete Post 
I think so. Send me your address as well.

--------------------
There is a fine line between a hobby and a mental illness

 |  IP: Logged

Edwin van Eck
Master Film Handler

Posts: 312
From: Tilburg, Netherlands
Registered: Feb 2015


 - posted November 16, 2016 08:30 AM      Profile for Edwin van Eck   Author's Homepage   Email Edwin van Eck   Send New Private Message       Edit/Delete Post 
These parts are being produced newly again!
See:
http://www.van-eck.net/itable.php?lang=en&size=0&cat=film&merk=57&type=Mark%20S%20810

 -

Today just added an new part:

 -

The nice thing about this new part is that is works not only for super8 reels, but also for regular8!

See: http://shop.van-eck.net/PP-0173.html?_globalsearch=pp-0173

--------------------
Edwin van Eck
Van Eck Video Services

 |  IP: Logged

Dominique De Bast
Film God

Posts: 4292
From: Brussels, Belgium
Registered: Jun 2013


 - posted November 16, 2016 12:18 PM      Profile for Dominique De Bast   Email Dominique De Bast   Send New Private Message       Edit/Delete Post 
Edwin. I don't see the piece discussed here on your list. Maybe you don't refer to the same thing ?

--------------------
Dominique

 |  IP: Logged

Brian Fretwell
Phenomenal Film Handler

Posts: 1668
From: London, UK
Registered: Jun 2014


 - posted November 16, 2016 02:46 PM      Profile for Brian Fretwell   Email Brian Fretwell   Send New Private Message       Edit/Delete Post 
Yes, the parts being talked about are the very small rollers that put together give a diablo shape so they do not touch the film except at the far edges, about 3mm diameter.

 |  IP: Logged

Edwin van Eck
Master Film Handler

Posts: 312
From: Tilburg, Netherlands
Registered: Feb 2015


 - posted November 16, 2016 03:26 PM      Profile for Edwin van Eck   Author's Homepage   Email Edwin van Eck   Send New Private Message       Edit/Delete Post 
Ok! Yes, we are also working on these rollers (for the Eumig 8 series), and also for the Eumig 6 series (these are different).

Hope to release these soon as well.

--------------------
Edwin van Eck
Van Eck Video Services

 |  IP: Logged

Steve Klare
Film Guy

Posts: 6811
From: Long Island, NY, USA
Registered: Jun 2003


 - posted November 16, 2016 04:05 PM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
The rollers would be a great addition!

As nearly as I can figure, the original ones are made of some kind of anti-matter.

-any time I have worked on a Eumig and one has fallen off the table, I have never, never, never seen it again! They just vanish!

Nearly as I can figure, some distant corner of the galaxy is full of them!

I've machined a few out of Delrin rod: close, could be better.

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Paul Adsett
Film God

Posts: 4844
From: USA
Registered: Jun 2003


 - posted November 16, 2016 06:07 PM      Profile for Paul Adsett     Send New Private Message       Edit/Delete Post 
I think the little Eumig rollers may possibly be made from Delrin AF, which is Delrin with an anti-friction very low wear Teflon filler. Delrin is typically black, whereas Delrin AF is brown.

--------------------
The best of all worlds- 8mm, super 8mm, 9.5mm, and HD Digital Projection,
Elmo GS1200 f1.0 2-blade
Eumig S938 Stereo f1.0 Ektar
Panasonic PT-AE4000U digital pj

 |  IP: Logged

Bill Brandenstein
Phenomenal Film Handler

Posts: 1624
From: California
Registered: Aug 2007


 - posted November 16, 2016 10:01 PM      Profile for Bill Brandenstein   Email Bill Brandenstein   Send New Private Message       Edit/Delete Post 
THESE elusive little cutie pies:
 -
 -

Edwin, I'm also very interested in your spindle sleeves, but if the fins aren't spring loaded and capable of retracting, won't work with some reels I have where the three notches are unevenly cut, or have fewer than three notches. Please clarify if your replacement part is solid or moveable, thanks. The original single-fin adapter works with all reels that I have:
 -
...where that photo shows that the adapter has a piece missing, which is the reason why I'm looking for a replacement.

 |  IP: Logged

Edwin van Eck
Master Film Handler

Posts: 312
From: Tilburg, Netherlands
Registered: Feb 2015


 - posted November 17, 2016 01:44 AM      Profile for Edwin van Eck   Author's Homepage   Email Edwin van Eck   Send New Private Message       Edit/Delete Post 
The rollers are almost ready for sale.

The adaptor is already available for sale! see:

http://shop.van-eck.net/PP-0006.html?_globalsearch=pp-0006

Adaptor sleeve - Eumig Mark S - PP-0006 Van Eck (new)

Adaptor to set super8 or single8 reel on a projector
Sleeve for take-up shaft S

Newly produced from strong plastic
Color: white

original product numbers:
Eumig 718.3414
Eumig 718.3414/0
Eumig 709 U 335

Fits on the following projectors (and many more)
- Eumig Mark 8
- Eumig Mark-DL
- Eumig Mark-S (2 adaptors)
- Eumig Mark S 709
- Eumig Mark S 710D
- Eumig Mark S 712D
- Eumig Mark S 802D
- Eumig Mark S 807D
- Eumig Mark S 810D
- Eumig R2000(some require the PP-0003 !)

--------------------
Edwin van Eck
Van Eck Video Services

 |  IP: Logged

Bill Brandenstein
Phenomenal Film Handler

Posts: 1624
From: California
Registered: Aug 2007


 - posted November 18, 2016 12:21 PM      Profile for Bill Brandenstein   Email Bill Brandenstein   Send New Private Message       Edit/Delete Post 
Nice, Edwin! When the rollers are ready, I'll place an order for all of these!

 |  IP: Logged

John Capazzo
Master Film Handler

Posts: 420
From: Hillside, NJ USA
Registered: Jan 2004


 - posted November 18, 2016 05:41 PM      Profile for John Capazzo   Email John Capazzo   Send New Private Message       Edit/Delete Post 
Does anyone have the standard 8mm sprockets for the Eumig 824? This is for the later edition that enabled you to remove the super 8 and standard 8mm sprockets.

--------------------
"the image is about 30 feet ahead of us."

 |  IP: Logged

Edwin van Eck
Master Film Handler

Posts: 312
From: Tilburg, Netherlands
Registered: Feb 2015


 - posted October 19, 2017 08:03 AM      Profile for Edwin van Eck   Author's Homepage   Email Edwin van Eck   Send New Private Message       Edit/Delete Post 
The film guide rollers for the Eumig 824 series are now also available!

 -

See: https://shop.van-eck.net/PP-0197.html?_globalsearch=pp-0197

Eumig 824 - Film guide rollers (set of 2) - PP-0197 (new)

Fits among others the following projectors:
- Eumig 820
- Eumig 824

Set of 2 guide rollers (2 rollers needed per axis)

Weight: 1 gram.
Size:
Height: 4,9 mm
Diameter: 5,8 mm
Axis hole: 3,2 mm

Design by 3dformadesign.nl
Made in the Netherlands

--------------------
Edwin van Eck
Van Eck Video Services

 |  IP: Logged



All times are Central  
Post New Topic  Post A Reply Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2