8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Bell & Howell 36SR Jumping A Bit

 - UBBFriend: Email this page to someone!    
Author Topic: Bell & Howell 36SR Jumping A Bit
Timothy Price
Master Film Handler

Posts: 335
From: Minneapolis, MN. USA
Registered: Nov 2009


 - posted March 23, 2014 04:04 PM      Profile for Timothy Price   Author's Homepage     Send New Private Message       Edit/Delete Post 
Howdy All-

My Bell & Howell 36SR is jumpy. Works PERFECT in reverse however! [Smile]

Any advice or suggestions?

Thanks

Tim

 |  IP: Logged

James E. Stubbs
Expert Film Handler

Posts: 104
From: Portland, OR
Registered: Apr 2007


 - posted March 31, 2014 10:51 PM      Profile for James E. Stubbs   Email James E. Stubbs   Send New Private Message       Edit/Delete Post 
Sounds like a lower loop problem. I've seen this with my ST1200HD with badly lubed/ shrunken film. Give everything a good clean and lube, put in a freshly cleaned/lubed film. If it still does it check the alignment of everything below the gate.
Cheers,

--------------------
James E. Stubbs
Consultant, Vagabond, Traveler.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2