Phil Murat
Jedi Master Film Handler
Posts: 671
From: Villeneuve St Georges, France
Registered: Dec 2015
|
posted June 26, 2017 02:16 PM
Hi Robert,
This device is just a Frequencemeter used to monitor speed by blades means from main shaft. This is a "stand alone" device and has no link to electronicaly adjust speed on any machine. It can not control or stabilize speeds.
I made the test with BEAULIEU "3 Bladed". The sensor is installed on shutter plane. to be note the device can work with one blade or two blades but setting are different and 2 sensors could be necessary. Precision of device is 2 numbers after dot.
| IP: Logged
|