8mm Forum: Eumig P26 Projector

»	8mm Forum » 8mm Forum » Eumig P26 Projector

UBBFriend: Email this page to someone!

Author

Topic: Eumig P26 Projector

Eric Shepherd
Film Handler

Posts: 34
From: Southport, England
Registered: Jun 2014

posted August 30, 2014 09:15 AM

Just acquired one of these which I am going to strip & convert to a lighting feature. I have removed most of the electrical internal parts, but cannot remove the gearbox as it would be too much disruption to the external film drive sprockets. If anyone is interested in the electrical components, which include the motor assembly, lamp, housing & holder, voltage regulators etc let me know. I am looking for a Eumig 8mm 400ft 7inch spool to match the one in the picture.

--------------------
A picture is worth a thousand words

| IP: Logged

Erik Snel
Junior
Posts: 30
From: Leiden, South Holland, the Netherlands
Registered: Nov 2013

posted December 07, 2014 04:29 AM

hello Eric, thats such a shame to destroy this beautifull machine. unfortunately what i think doesn't matter and its your to destroy after all. however. i have a p26 without the motor because it came in as a diy kit with many parts missing so i am interested in those parts from your machine. PM for more information?

--------------------
Erik Snel Eumig Expert
ES Filmtechniek

| IP: Logged

Clinton Hunt
Jedi Master Film Handler

Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010

posted December 08, 2014 05:48 PM

Just as a comment on this projector..................I got one of these a while ago and the picture was ghosty, so I waited for another to come up for sale in New Zealand and the 2nd one I won goes well...Eumigs can be good reliable projectors and this one takes pride and place in my collection. [Smile]

--------------------
Cheers from me in New Zealand :-)

| IP: Logged

Michael Rudkin
Junior
Posts: 2
From: Nelson, New Zealand
Registered: Jan 2015

posted January 19, 2015 03:23 PM

Hi, do you have the power cable, drive belt, the carry case or the manual for the P26?

--------------------
Michael

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2