8mm Forum: Locating the fuse in a Sankyo 700

»	8mm Forum » 8mm Forum » Locating the fuse in a Sankyo 700

UBBFriend: Email this page to someone!

Author

Topic: Locating the fuse in a Sankyo 700

Paul Brandes
Film Handler

Posts: 61
From: Australia
Registered: May 2010

posted January 10, 2015 06:53 PM

Hi,

I am trying to find the fuse in a Sankyo 700 projector I have. I bought a manual from Old Timer Cameras and it does mention a fuse, butI have not been able to locate it. I would be grateful if anyone on the forum could tell me where it would be.

Many thanks.

| IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003

posted January 10, 2015 08:35 PM

The main fuse has to be the first stop after the power inlet, because if there is a short circuit to chassis between the inlet and the fuse the fuse won't blow and the whole show could go up in flames. If everything in the machine is after the fuse, everything is controlled by it.

So if you find where the power enters the machine and follow the black wire, it should take you right to the fuse.

--------------------
All I ask is a wide screen and a projector to light her by...

| IP: Logged

Paul Brandes
Film Handler

Posts: 61
From: Australia
Registered: May 2010

posted January 12, 2015 01:35 PM

Hi Steve,

Many thanks. I thought the fuse was on one of the boards.So far I havent found it but will keep looking.

Regards

paul

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2