Myron Baron
Film Handler
Posts: 49
From: Easton, Pa 18045
Registered: Jan 2008
|
posted December 31, 2015 01:16 PM
Since I last posted back in July 2015, I have done quite a bit of modifications to my kit. I now have a large bulb and an On/Off switch installed on the Container holding the driver unit, I also installed a heat sensor, due to one of my customers forgetting to turn off the LED, he just turned off the projector and burned up the LED, now I have a heat sensor which automatically shuts down the LED when it reaches a temp. of 200 degrees F. and will not burn up the LED. Of course all these additions will add to the cost of the unit. The unit The new cost will be $ 220.00 Shipping is free with in the US. No International shipping anymore, to expensive. You can view a video by going tohttp://www.dvds2envy.com and clickig on the CXR/CXL kit tab. The projector I am using is a Sankyo Duralex 1000
[ February 23, 2017, 07:02 PM: Message edited by: Myron Baron ]
| IP: Logged
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
