8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Wolverine

- UBBFriend: Email this page to someone!    
Author Topic: Wolverine
James Wilson
Expert Film Handler

Posts: 230
From: Norwich, UK
Registered: Jan 2015

- posted July 08, 2017 08:52 AM      Profile for James Wilson   Author's Homepage     Send New Private Message       Edit/Delete Post 
Hi All.

Has any one else returned thier machine to be updated. I was reading on here the otherday they have now replaced the belt with
a motor, & addeded a fan. Can someone confirm please. and does this modefication also apply to the Somikon.

--------------------
James Wilson

 |  IP: Logged
Mike Spice
Master Film Handler

Posts: 421
From: none of your business
Registered: Jun 2017

- posted July 08, 2017 09:54 AM      Profile for Mike Spice     Send New Private Message       Edit/Delete Post 
I have just taken delivery of my Wolverine, it is working just fine.
My model has air vents on the back. So far so good, I have scanned 35000ft to date

 |  IP: Logged
Peter Scott
Film Handler

Posts: 58
From: Norfolk, UK
Registered: Nov 2014

- posted July 11, 2017 04:03 AM      Profile for Peter Scott     Send New Private Message       Edit/Delete Post 
Is this a free update or is their a charge for it ?

Thanks

Peter

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2