8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Demand for ECN-2 Processing?

 - UBBFriend: Email this page to someone!    
Author Topic: Demand for ECN-2 Processing?
Jake Mayes
Expert Film Handler

Posts: 119
From: Bath, UK
Registered: Sep 2012


 - posted December 12, 2017 05:23 PM      Profile for Jake Mayes   Email Jake Mayes   Send New Private Message       Edit/Delete Post 
I develop all my own films at home such as E6, still negatives, RA4 and prints (UK) and am starting to process ECN-2 with good success. (If only i could print them myself [Frown] )

Is there likely to be any demand for ECN-2 processing from folks here at £12.00 a roll to process?

As i can have two films in the tank at any one time, i would gladly use spare chemicals to process the film of others, as i have to mix up a certain batch and would likely not use them to their end before i need to mix a new batch as i like to develop all films shortly after mixing for consistent results.

I am not offering the service yet, but i aim to on my etsy shop at some point which I am setting up. I am curious as to interest. I have developed my own E6 and C41 and B&W for an age, only makes sense to do my own ECN-2.

I am looking to gauge interest before offering such as a service in the UK as an alternative to a few others.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2