Bill Pritchett
Junior
Posts: 7
From: Florida, USA
Registered: Dec 2017
|
posted January 11, 2018 01:46 PM
Hello to Everyone.
My mailman just delivered the above Atlas Warner editor just purchased on "da bay'. First thing I noticed was rattling inside the unit. The bulb lights but doesn't get to the screen so I removed the cover. 2 of the 3 glass mirrors came unglued and were installed with double back tape. The tape looks old and probably original and is in bad shape. I doesn't look like a precision installation but some dirction from others is welcome The old glue line are visible so I can at least get close to where they are supposed to be. I may try double back tape or a dab of slicone to experiment with...the unit projected before shipping so I assume they broke loose during the journey.
Any advice on this? Also, will the frame adjustment on the unit help make up for a not so accurate placement?
Thanks,
-------------------- Bill
| IP: Logged
|