8mm Forum


  
my profile | my password | register | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Eumig 940

 - UBBFriend: Email this page to someone!    
Author Topic: Eumig 940
Stuart Hilliker
Film Handler

Posts: 79
From: London
Registered: Dec 2006


 - posted May 19, 2018 07:20 AM      Profile for Stuart Hilliker   Email Stuart Hilliker   Send New Private Message       Edit/Delete Post 
I’m looking for four fader caps to replace those missing from my Eumig 940.
Does anyone have any spares?
Thanks

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted May 19, 2018 07:23 AM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
If anybody can define the capacitances, types and voltages of the caps, they can probably be bought new. (Eumig often put schematics in their manuals.)

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Stuart Hilliker
Film Handler

Posts: 79
From: London
Registered: Dec 2006


 - posted May 19, 2018 07:28 AM      Profile for Stuart Hilliker   Email Stuart Hilliker   Send New Private Message       Edit/Delete Post 
Sorry Steve. I should have been clearer. It’s the plastic tops of the faders I’m looking for, not capacitors for a change! They appear to snap off very easily.

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted May 19, 2018 07:33 AM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
Sorry!

-you say "cap" around an electronics guy and it gets the Microfarads happening! [Big Grin]

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted May 19, 2018 07:55 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
A project for Edwin perhaps?

--------------------
Maurice

 |  IP: Logged

Martin Dew
Expert Film Handler

Posts: 204
From: Henley-on-Thames, UK
Registered: Jan 2017


 - posted May 21, 2018 05:27 PM      Profile for Martin Dew   Email Martin Dew   Send New Private Message       Edit/Delete Post 
I know where you can get some slider caps, Stuart. PM if you're interested in the manual too.

 |  IP: Logged

Stuart Hilliker
Film Handler

Posts: 79
From: London
Registered: Dec 2006


 - posted May 22, 2018 12:36 AM      Profile for Stuart Hilliker   Email Stuart Hilliker   Send New Private Message       Edit/Delete Post 
Thanks Martin. Have sent you an email.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2