8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Eumig Mark S query

 - UBBFriend: Email this page to someone!    
Author Topic: Eumig Mark S query
Colin Parkinson
Junior
Posts: 8
From: Halifax, UK
Registered: Jun 2018


 - posted June 15, 2018 03:12 PM      Profile for Colin Parkinson   Email Colin Parkinson   Send New Private Message       Edit/Delete Post 
Hi guys i am new to this! I have picked up a Eumig Mark S which needs new motor bearings which I have ordered from Van Eck.

Has anyone got instructions on how to remove the motor so I can change them?

Many thanks

Colin

 |  IP: Logged

Maurizio Di Cintio
Jedi Master Film Handler

Posts: 977
From: Ortona, Italy
Registered: Jan 2004


 - posted June 15, 2018 05:39 PM      Profile for Maurizio Di Cintio   Email Maurizio Di Cintio   Send New Private Message       Edit/Delete Post 
Van Eck should be able to provide you with all necessary info...

--------------------
Maurizio

 |  IP: Logged

John Last
Expert Film Handler

Posts: 104
From: Codsall, UK
Registered: Dec 2012


 - posted June 19, 2018 01:47 PM      Profile for John Last   Email John Last       Edit/Delete Post 
If you buy the workshop manual for this projector from Old Timer full details are given on how to set up the motor and all other parts too.

 |  IP: Logged

Colin Parkinson
Junior
Posts: 8
From: Halifax, UK
Registered: Jun 2018


 - posted June 19, 2018 03:16 PM      Profile for Colin Parkinson   Email Colin Parkinson   Send New Private Message       Edit/Delete Post 
Thanks John, how do I find Old Timer?

Colin

 |  IP: Logged

Colin Parkinson
Junior
Posts: 8
From: Halifax, UK
Registered: Jun 2018


 - posted June 23, 2018 12:04 PM      Profile for Colin Parkinson   Email Colin Parkinson   Send New Private Message       Edit/Delete Post 
I have removed the amplifier and transformer, and managed to change the bearings.

Not that difficult, just a bit of a fiddle......

Colin

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2