8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Elmo TRV-S8 motor?

 - UBBFriend: Email this page to someone!    
Author Topic: Elmo TRV-S8 motor?
Arno Featherstone
Junior
Posts: 18
From: Seaside, CA, USA
Registered: Apr 2019


 - posted May 09, 2019 09:09 AM      Profile for Arno Featherstone   Author's Homepage   Email Arno Featherstone   Send New Private Message       Edit/Delete Post 
Hello...latest problem, in mid reel it starts to slow down, then pick up, then eventually struggle to turn....belts are fine, i suspect the motor. Does that sound right?

--------------------
Arno

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted May 09, 2019 10:22 AM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
I've had similar problems with Elmo STs, which this one is a close cousin.

This may help:

Unplug the machine
Grab the film speed switch
slide it briskly back and forth about 10 times

Try it and see if it's gotten better.

The big thing with the motor is worn brushes. When one of mine had that I started to get buzzing on the audio. It was so bad it actually was getting picked up on an AM radio anywhere in the house.

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Arno Featherstone
Junior
Posts: 18
From: Seaside, CA, USA
Registered: Apr 2019


 - posted May 09, 2019 10:35 AM      Profile for Arno Featherstone   Author's Homepage   Email Arno Featherstone   Send New Private Message       Edit/Delete Post 
thanks! now, my next question....where is the film speed switch? i have a reel stuck on there midway and as it totally stopped even in reverse, i watched as the vertical belt came off the track

--------------------
Arno

 |  IP: Logged

Steve Klare
Film Guy

Posts: 7016
From: Long Island, NY, USA
Registered: Jun 2003


 - posted May 09, 2019 10:41 AM      Profile for Steve Klare   Email Steve Klare   Send New Private Message       Edit/Delete Post 
There should be a control panel on the side or back with various switches and jacks. My speed select is labeled "18 24", but being for transfer, I think yours would have different numbers.

You should be able to remove a film mid-reel:

See page 16 in this link.

--------------------
All I ask is a wide screen and a projector to light her by...

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted May 09, 2019 11:43 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Control of film speed appears to be just below the carrying handle. Click, then again for enlargement.
https://van-eck.net/img/itable/images/film_52_TRV-S8_1450362359783.jpg

--------------------
Maurice

 |  IP: Logged

Arno Featherstone
Junior
Posts: 18
From: Seaside, CA, USA
Registered: Apr 2019


 - posted May 09, 2019 01:50 PM      Profile for Arno Featherstone   Author's Homepage   Email Arno Featherstone   Send New Private Message       Edit/Delete Post 
this is all real helpful (REEL helpful?) i don't have a switch, just a varispeed which i massaged a bit as suggested. two things i notice with back cover off...there was a machine whine which has currently subsided but the vertical belt during reverse, comes off the track....too much play? i dismissed belts as the problem, thinking the motor whine was the issue, maybe it's the belts. although they look new, the vertical one seems looser than it should be

--------------------
Arno

 |  IP: Logged

Leon Norris
Jedi Master Film Handler

Posts: 958
From: Elkins Park, PA, USA
Registered: Jun 2012


 - posted May 13, 2019 12:25 PM      Profile for Leon Norris   Email Leon Norris   Send New Private Message       Edit/Delete Post 
It sounds like it could be the governor circuit board ! If that goes bad then the motor will not run! Also this machine takes the same motor as the st180 E and ETC models! I have a couple used ones in stock!

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2