8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm equipment for sale/trade   » ELMO SC-18 Variable Speed Control

 - UBBFriend: Email this page to someone!    
Author Topic: ELMO SC-18 Variable Speed Control
Jon R Light
Junior
Posts: 8
From: Chilliwack, B.C. Canada
Registered: Nov 2007


 - posted June 20, 2009 01:03 AM      Profile for Jon R Light   Author's Homepage     Send New Private Message       Edit/Delete Post 
Anyone looking to have a variable speed control for the Elmo SC-18, can purchase the conversion kit at the link below ... This is not just a lamp dimmer cut into the motor circuit.

Elmo SC-18

Or check it out on Ebay at this link ...

Ebay

 |  IP: Logged

Martin Jones
Phenomenal Film Handler

Posts: 1269
From: Thetford , Norfolk,England
Registered: May 2008


 - posted June 20, 2009 03:27 AM      Profile for Martin Jones     Send New Private Message       Edit/Delete Post 
I suspect, Jon , that your conversion is just as applicable to other machines in the wide range of Elmos that use a motor control board with speed presets, although the value for the potentiometer required may vary dependant on whether the board is "pre-IC" or not.

Martin

--------------------
Retired TV Service Engineer
Ongoing interest in Telecine....

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2