8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm equipment for sale/trade   » WANTED - DJL Lamp for B&H 456A

 - UBBFriend: Email this page to someone!    
Author Topic: WANTED - DJL Lamp for B&H 456A
Herb Finn
Junior
Posts: 12
From: Boston, MA, USA
Registered: Jan 2012


 - posted July 01, 2012 01:22 AM      Profile for Herb Finn     Send New Private Message       Edit/Delete Post 
I'm looking for affordable DJL Bulbs or substitution for my Bell & Howell 456A

Is there an acceptable substitution that would fit it?

 |  IP: Logged

George Tveden
Film Handler

Posts: 9
From: Spokane, WA 99027
Registered: Nov 2012


 - posted April 06, 2013 09:39 PM      Profile for George Tveden   Author's Homepage     Send New Private Message       Edit/Delete Post 
Hi Herb,
I have used MR16 type lamps to convert many old Bell & Howell projectors like the 456. If you don't mind modifying your projector by mounting a GE-QLV-1 lamp socket, and then popping in an MR16 Halogen or Xenon lamp like an ESD or EZK you can save a lot of money, complete a fun project, and have a better projector set-up with longer life lamps. Also, DJL plug-in modules are available on the internet for those folks that don't want to drill holes in their projectors. Hope this helps, good luck!
 -

--------------------
Geo. Tveden

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2