8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Disassembling 50mm Cine-Xenon

 - UBBFriend: Email this page to someone!    
Author Topic: Disassembling 50mm Cine-Xenon
John Wilton
Junior
Posts: 16
From: New York, NY, USA
Registered: Jun 2005


 - posted August 18, 2005 12:11 AM      Profile for John Wilton   Author's Homepage     Send New Private Message       Edit/Delete Post 
My old Cine-Xenon suffers from a loose connection between the aperture setting ring and the blades mechanism inside...there is about a 1/2-stop of play, making it hard to accurately set aperture. Anyone have any experience/documentation on disassembling this lens, or advice on correct forum to pose this question? (photo to identify lens):
 -

--------------------
John Wilton
NYC

 |  IP: Logged

Kevin Faulkner
Film God

Posts: 4071
From: Essex UK
Registered: Jun 2003


 - posted August 20, 2005 05:34 PM      Profile for Kevin Faulkner         Edit/Delete Post 
I think this was probably the right place John. I have to say what a nice looking lens. They dont make them like that anymore. German engineering at it's best.

Kev.

--------------------
GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.

 |  IP: Logged

John Whittle
Jedi Master Film Handler

Posts: 791
From: Northridge, CA USA
Registered: Jun 2003


 - posted August 20, 2005 11:41 PM      Profile for John Whittle   Email John Whittle       Edit/Delete Post 
John

Disassembly is tricky, but re-assembly requires special tools and colimation (sp). There are some excellent camera repair places in NY as there are out here in Hollywood/Los Angeles. If you were in LA, I'd suggest Century Optics or a couple of other guys I've worked with. Possibly someone at Panavision New York in the service department can recommend someone in your area. I don't know, but doubt this is just a screw tightening adjustment. Most cases require replacement of the iris blades and if the lens is in otherwise good condition, it's probably worth it.

John

 |  IP: Logged

Josef Grassmann
Expert Film Handler

Posts: 190
From: Hennef-Sieg, Germany
Registered: Apr 2005


 - posted August 27, 2005 05:44 PM      Profile for Josef Grassmann   Author's Homepage   Email Josef Grassmann   Send New Private Message       Edit/Delete Post 
Thanks to Kevin Faulkner for "german engineering at itīs best"
Itīs nice to hear it from an English expert.
Greetings to Essex,

Josef

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2