8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Small issue with my Eiki 50mm 1.2 lens...

 - UBBFriend: Email this page to someone!    
Author Topic: Small issue with my Eiki 50mm 1.2 lens...
Jan Bister
Darth 8mm

Posts: 2629
From: Ohio, USA
Registered: Jan 2005


 - posted September 18, 2005 09:39 PM      Profile for Jan Bister   Email Jan Bister   Send New Private Message       Edit/Delete Post 
My Eiki SSL-0 came with its standard 50mm 1:1.2 lens... and I took the lens and completely disassembled it. Meaning I now have an empty barrel (which fits into the projector's lens holder) as well as several lenses and distance rings plus threaded rings to screw in and hold things in place.

Why I did this is a long story and not important right now... [Roll Eyes] However, I unexpectedly find myself in need of this 50mm lens once again. And the problem is, I have NO clue how to put it back together - i.e. what goes where and in what orientation (seeing as that some lenses are shaped differently on both sides)! And it's surprisingly hard finding another 50mm Eiki lens on eBay or anywhere else. [Frown]

Who can help and show me how things go back in there? Alternatively, who's willing to let me have a 50mm Eiki lens for cheap?

--------------------
Call me Phoenix. *dusts off the ashes*

 |  IP: Logged

John A. Pommon
Film Handler

Posts: 69
From: San Francisco, California 94131
Registered: Nov 2004


 - posted September 18, 2005 11:07 PM      Profile for John A. Pommon   Author's Homepage     Send New Private Message       Edit/Delete Post 
Hi Jan - Here's a few options to look over:

38MM (1 1/2 nich) PROJECTION LENS FOR EIKI Item number: 7547069234

EIKI 16mm Projector Lens Zoom 50mm MINT Condition NR Item number: 7545274143

16 MM B&H ZOOM LENS & C RING ADAPTOR & EIKI LENS Item number: 7546085203.

16MM EIKI LARGE IMAGE LENS - FOR 16-C SCOPE LENS Item number: 6432657133

--------------------
Antique Video Transfer Service
2" Quadruplex videotape to DV/DVCAM digital transfers
5001 Diamond Hts Blvd.
San Francisco, CA 94131-1621
www.antiquevideo.com
antvid@antiquevideo.com

 |  IP: Logged

Jan Bister
Darth 8mm

Posts: 2629
From: Ohio, USA
Registered: Jan 2005


 - posted September 19, 2005 12:32 AM      Profile for Jan Bister   Email Jan Bister   Send New Private Message       Edit/Delete Post 
Thanks for these pointers, second item sounds promising. [Smile] Are you the same John who told the seller that this was not a zoom lens? [Big Grin]

Well, here's my dilemma... I just got my first 16mm scope print so I will eventually need a scope lens to watch it properly. As I've been told, scope lenses stretch the image horizontally by 2x whereas vertically it stays the same... I've also been warned that certain scope lenses may cause vignetting or egg-shaped images if used with anything much shorter than a 50mm (2") lens.

Since I now have a 25mm (1" lens) - fashioned up from a super-8 lens stuffed inside the Eiki 50mm barrel - and plan to set up the projector such that it just fills my entire screen with that lens, I figure using a 50mm prime lens plus a scope lens will give me the same image width but half the image height. That way I won't have to change projection distance. Am I thinking correctly here?

Anybody else ever had to deal with this practical dilemma? (switching between flat and scope without having to change projetion distance?) [Eek!]

--------------------
Call me Phoenix. *dusts off the ashes*

 |  IP: Logged

John A. Pommon
Film Handler

Posts: 69
From: San Francisco, California 94131
Registered: Nov 2004


 - posted September 19, 2005 12:44 AM      Profile for John A. Pommon   Author's Homepage     Send New Private Message       Edit/Delete Post 
"Thanks for these pointers, second item sounds promising. Are you the same John who told the seller that this was not a zoom lens?"

No.

--------------------
Antique Video Transfer Service
2" Quadruplex videotape to DV/DVCAM digital transfers
5001 Diamond Hts Blvd.
San Francisco, CA 94131-1621
www.antiquevideo.com
antvid@antiquevideo.com

 |  IP: Logged

Jan Bister
Darth 8mm

Posts: 2629
From: Ohio, USA
Registered: Jan 2005


 - posted September 19, 2005 01:25 AM      Profile for Jan Bister   Email Jan Bister   Send New Private Message       Edit/Delete Post 
Wow, simple and to the point. [Smile]

--------------------
Call me Phoenix. *dusts off the ashes*

 |  IP: Logged

John Whittle
Jedi Master Film Handler

Posts: 791
From: Northridge, CA USA
Registered: Jun 2003


 - posted September 19, 2005 08:45 PM      Profile for John Whittle   Email John Whittle       Edit/Delete Post 
quote:
Thanks for these pointers, second item sounds promising. Are you the same John who told the seller that this was not a zoom lens?

Well, here's my dilemma... I just got my first 16mm scope print so I will eventually need a scope lens to watch it properly. As I've been told, scope lenses stretch the image horizontally by 2x whereas vertically it stays the same... I've also been warned that certain scope lenses may cause vignetting or egg-shaped images if used with anything much shorter than a 50mm (2") lens.

I was the one that told him it wasn't a zoom lens for one simple reason, it isn't. It's exactly like the lens you took apart.

As for scope lenses and back up lenses. On the Eiki you can use a 38mm lens behind the scope lens without a problem, anything wider and you MAY have trouble depending on the throw. A larger scope lens (the "D" size vs the "C" size) might help but the adapter holder from Eiki is long obsolete, you'll have better luck finding a "C" size holder. When it's installed you can leave the lens on the projector and just flip it up when you have a scope film and it'll be aligned and focused.

One word about taking lenses apart:

DON'T.

John

 |  IP: Logged

Jan Bister
Darth 8mm

Posts: 2629
From: Ohio, USA
Registered: Jan 2005


 - posted September 19, 2005 09:19 PM      Profile for Jan Bister   Email Jan Bister   Send New Private Message       Edit/Delete Post 
Kind of late with that bit of advice, but point taken nevertheless. I didn't really see any other (inexpensive) way of getting myself an empty lens barrel besides sacrificing the 50mm lens I had [Roll Eyes] but don't worry - I'm not normally that destructive... nor would I dream of taking any other lens apart unless it were cheap and of low quality (or in this case... just cheap). [Eek!]

I did win me a Kalart Victorscope anamorphic lens on eBay just now, though... woohoo!... if and how it'll fit on my (modified-to-1-inch) Eiki lens remains to be seen when it gets there, if I have to fashion up a lens holder for this gadget then I'll cross that bridge when I get to it.

[Smile]

--------------------
Call me Phoenix. *dusts off the ashes*

 |  IP: Logged

Steven Sigel
Jedi Master Film Handler

Posts: 701
From: Massachusetts
Registered: Jun 2003


 - posted September 19, 2005 10:15 PM      Profile for Steven Sigel   Email Steven Sigel   Send New Private Message       Edit/Delete Post 
Jan --

I've got an extra 50mm Eiki lens. $20 + shipping...

email me if you want it... (sts (at) sigel (dot) net)

 |  IP: Logged

John A. Pommon
Film Handler

Posts: 69
From: San Francisco, California 94131
Registered: Nov 2004


 - posted September 19, 2005 10:15 PM      Profile for John A. Pommon   Author's Homepage     Send New Private Message       Edit/Delete Post 
Several years ago I took a lens apart to clean it.
After wasting an evening it ended up in the garbage can.
John said a mouthfull.

Resist Temptation . . no matter what!

--------------------
Antique Video Transfer Service
2" Quadruplex videotape to DV/DVCAM digital transfers
5001 Diamond Hts Blvd.
San Francisco, CA 94131-1621
www.antiquevideo.com
antvid@antiquevideo.com

 |  IP: Logged

Jan Bister
Darth 8mm

Posts: 2629
From: Ohio, USA
Registered: Jan 2005


 - posted September 20, 2005 01:52 PM      Profile for Jan Bister   Email Jan Bister   Send New Private Message       Edit/Delete Post 
Steve,

thanks for the offer - will take you up on it if I find I need another 50mm lens, but for now... I'm waiting and seeing. [Smile]

As for the 50mm lens I took apart, I don't even think of it as a loss... for I was able to find a suitable super-8 lens (incidentally a Bell & Howell f1.6 zoom lens), put it in the Eiki barrel, and get myself a nice big 16mm picture with no vignetting or distorted frame. I ought to post some pictures of it soon... [Smile]

--------------------
Call me Phoenix. *dusts off the ashes*

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2