8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Projector feedback

 - UBBFriend: Email this page to someone!    
Author Topic: Projector feedback
Paul Bruty
Film Handler

Posts: 42
From: Ballarat Victoria Australia
Registered: Apr 2011


 - posted November 24, 2011 11:30 PM      Profile for Paul Bruty   Email Paul Bruty   Send New Private Message       Edit/Delete Post 
Thoughts re this projector for playing short home movies?

Hanimex -Eiki Sound Movie Projector Optical

Regards, Paul. [Smile]

 |  IP: Logged

Dino Everette
Phenomenal Film Handler

Posts: 1535
From: Long Beach, CA USA
Registered: Dec 2008


 - posted November 26, 2011 12:18 AM      Profile for Dino Everette     Send New Private Message       Edit/Delete Post 
I don't know of any Hanimex specific 16mm projectors so I am guessing this would simply be a straight Eiki which Hanimex distributed in Australia and should be a good machine to have for 16mm in general. If you are new to film projectors than I would just stress making sure that:
A) - The machine is clean and free of dust and debris before running film
B) - The film has been inspected, prepped and properly repaired before running it through the eiki.

Follow those 2 guidelines and you should be golden.... [Smile]

--------------------
"You're too Far Out Miss Lawrence"

 |  IP: Logged

Lee Mannering
Film God

Posts: 3216
From: The Projection Box
Registered: Nov 2006


 - posted November 26, 2011 05:17 AM      Profile for Lee Mannering     Send New Private Message       Edit/Delete Post 
Hi Paul.
It’s a bit of a catch 22 with projectors and particularly with more modern 16mm machines. On one hand the Elf machines are easy to maintain with a modular design but unfortunately the claw mechanism has a very fast pull down and is fussy if a film is shrunken or with some splices causing loss of lower loop and hence film shredding. Locally projectionists favour the Bell & Howell TQ3 Specialist with a 3 pin claw giving greater picture steadiness, extra lamp cooling fan and more. The down side is that the drive worm gears can split needing replacement. However, as with all things mechanical we should expect to maintain them so I personally do not see this to be an issue. Both Elf and Bell & Howell machines then have benefits for the user.

 |  IP: Logged

John Davis
Master Film Handler

Posts: 286
From: Dunfermline, Fife, UK
Registered: Jun 2008


 - posted November 26, 2011 05:20 AM      Profile for John Davis   Email John Davis   Send New Private Message       Edit/Delete Post 
Like Dino I think this is a straight Eiki - Elf projector with the addition of a Hanimex (http://camerapedia.wikia.com/wiki/Hanimex The name is a contraction of HANnes IMport and EXport) badge.
In the 70s and 80s Hanimex was a well known brand in the UK too but as far as I know never made anything themselves

 |  IP: Logged

Paul Bruty
Film Handler

Posts: 42
From: Ballarat Victoria Australia
Registered: Apr 2011


 - posted November 26, 2011 09:41 PM      Profile for Paul Bruty   Email Paul Bruty   Send New Private Message       Edit/Delete Post 
Thanks everyone.

Regards, Paul [Smile]

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2