8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » 12v 100w replacement bulb holders

- UBBFriend: Email this page to someone!    
Author Topic: 12v 100w replacement bulb holders
Jason Moffatt
Expert Film Handler

Posts: 104
From: Denham, Buckinghamshire, UK
Registered: Aug 2014

- posted December 31, 2016 06:09 AM      Profile for Jason Moffatt   Email Jason Moffatt   Send New Private Message       Edit/Delete Post 
Hi everyone.One of my projectors needs the bulb holder socket replacing.It uses the 12v 100w EFP bulb.I've looked on ebay and there are quite a few but they only seem to be rated at 50w or the rating is not mentioned.Does anyone know a good replacement and where to get one in the UK ?.There are a few ceramic ones on ebay which would possibly handle the extra power and heat but the rating is not mentioned.

 |  IP: Logged
David Guest
Phenomenal Film Handler

Posts: 1704
From: Lancashire, UK
Registered: Oct 2011

- posted December 31, 2016 08:37 AM      Profile for David Guest     Send New Private Message       Edit/Delete Post 
I think I might have some send me a picture to dwgdodgems@hotmail.co.uk

 |  IP: Logged
Andrew Woodcock
Film God

Posts: 7477
From: Manchester Uk
Registered: Aug 2012

- posted December 31, 2016 09:39 AM      Profile for Andrew Woodcock         Edit/Delete Post 
Bender & Wirth produce the best lamp holders for Super 8mm machines Jason. [Wink]

--------------------
"C'mon Baggy..Get with the beat"

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2