8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Ampro Precision Model J circa 1935 - Missing drive belt replacement?

 - UBBFriend: Email this page to someone!    
Author Topic: Ampro Precision Model J circa 1935 - Missing drive belt replacement?
Frank Rizzo
Junior
Posts: 1
From: Dearborn Heights, MI, USA
Registered: Aug 2018


 - posted August 06, 2018 11:01 AM      Profile for Frank Rizzo     Send New Private Message       Edit/Delete Post 
At a loss here... I picked up an old Ampro model J that is in mint condition (except for a cracked lamp lens and degrading lamp wiring/insulation) and the missing drive belt.

Can anyone tell me what the diameter and length of the drive belt should be so I can find a replacement?

Thanks! b

--------------------

Frank

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2