8mm Forum


Post New Topic  Post A Reply
my profile | my password | register | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 16mm Forum   » Bristol 6 flute spline wrenches

 - UBBFriend: Email this page to someone!    
Author Topic: Bristol 6 flute spline wrenches
Jonathan Wood
Junior
Posts: 9
From: Oxfordshire, UK
Registered: Oct 2018


 - posted March 13, 2019 03:48 PM      Profile for Jonathan Wood   Email Jonathan Wood   Send New Private Message       Edit/Delete Post 
Hi
Does anyone know of a UK stockist for the above type of wrench ? (They’re the ones necessary for B&H projectors. )

Thanks

Jon

 |  IP: Logged

Clyde Miles
Expert Film Handler

Posts: 188
From: Bromsgrove, UK
Registered: Nov 2013


 - posted March 13, 2019 06:40 PM      Profile for Clyde Miles   Email Clyde Miles   Send New Private Message       Edit/Delete Post 
ive always used allen keys, no problem. best

 |  IP: Logged

Paul Repar
Junior
Posts: 8
From: Chicago,Illinois
Registered: Apr 2006


 - posted March 14, 2019 03:37 PM      Profile for Paul Repar   Email Paul Repar   Send New Private Message       Edit/Delete Post 
Hi Jonathan,I am not sure who in the UK sells them,but a company here in the states called Test Equipment Depot sells all the new Bristol spline tools you need,the main Bristol blades as the call them you will need for working on the B&H projectors will be the Xcelite 99 series 66N,64N and the 62N,66 for the pulley wheels,the leveling height adjustment knoband the upper/lower sprocket gears,and the worm gear,the 64N for if you have,the loop restorer cam,and the 62N for the in and out cam follower adjustment set screw.And also a 99 series blade handle to swap out each tool.Good luck

 |  IP: Logged

Barry Fritz
Phenomenal Film Handler

Posts: 1032
From: Burnsville, MN, USA
Registered: Dec 2009


 - posted March 15, 2019 10:52 AM      Profile for Barry Fritz   Email Barry Fritz   Send New Private Message       Edit/Delete Post 
I believe Larry sells them, and others sell them on Amazon. I would not recommend using an Allen wrench. The fit is not correct and if you strip the socket, you will be in for trouble.

 |  IP: Logged



All times are Central  
Post New Topic  Post A Reply Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2010 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2