posted July 20, 2007 10:13 AM
hi all I just got hold of a proskar anamorphic16 lens and a couple of scope films. I need a mount to fit it to my Rank projector, it was sold as being previously on an Eiki/elf barrel is about 41mm, anyone know where I can get one of how to make one, my projector is fitted with a 30-60mm zoom. I know little on setting this up. thanks
Posts: 815
From: Berlin, Germany, Europe, Earth, Solar System
Registered: Apr 2006
posted July 23, 2007 07:50 AM
Hi,
you don't have to screw it into your projector's lens. Using a device like the "Universalhalterung" shown in the link below and positioning the anamorphic lens right before the projector's lens would do: http://www.ffr-film.de/index.php?page=anamorphotenhalter&header=&language=de Of course you don't have to buy such a device as you can construct it out of some wood and some pipe clips yorself...
posted July 24, 2007 08:24 AM
thanks I will probably end up making a bracket, I was able to jubilee clip my standard 50mm lens to it using a barrel sleeve, but my zoom is a bit bigger so I'll have to construct a stand and bracket to match them up.