8mm Forum: Looking for a Bell and Howell or Bauer P7

»	8mm Forum » 16mm equipment for sale/trade » Looking for a Bell and Howell or Bauer P7

UBBFriend: Email this page to someone!

Author

Topic: Looking for a Bell and Howell or Bauer P7

Mark Todd
Film God

Posts: 3846
From: UK
Registered: Aug 2003

posted November 21, 2014 10:48 AM

Hi Still on the lookout for a nice Bauer P7 and also now looking for a Bell and Howell TQ3, the version with the slideing belt lever from 18-24 FPS.

Many Thanks Mark.

| IP: Logged

Paul Mason
Jedi Master Film Handler

Posts: 540
From: Aldershot, Hampshire, UK
Registered: Nov 2013

posted November 22, 2014 03:34 AM

Hi Mark,

I don't think any of the TQ3s have a belt operated speed change? Not the 1692, 1693, 1694, 1695 or 1698 which all have a slider switch at the back. May be the 25XX series have it though some are single speed.

Good luck with the P7 too.

--------------------
Paul.

| IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007

posted November 22, 2014 04:14 AM

The TQM models 2685, 2692 & 2698 have a sliding lever below the lamp-house for speed change.
As the lever flips over the belt it should only be moved when the motor is running.

--------------------
Maurice

| IP: Logged

Mark Todd
Film God

Posts: 3846
From: UK
Registered: Aug 2003

posted November 22, 2014 05:00 AM

Thank You Maurice, so looking for one of those.

Very much appreciated.

Best Mark.

| IP: Logged

Clyde Miles
Expert Film Handler

Posts: 205
From: Bromsgrove, UK
Registered: Nov 2013

posted November 22, 2014 05:29 AM

mark,

there is one on ebay now,

item number 321584743663

| IP: Logged

Mark Todd
Film God

Posts: 3846
From: UK
Registered: Aug 2003

posted November 22, 2014 05:40 PM

Thanks Clyde asked about the worm gear as if its not been done yet about £30 would be my max with all the costs.

You can obviously get the things free etc just that I need one specifically with an asynchronus motor here.

Best Mark.

PS bit odd its says no wear and tear anywhere looking at the pics ?

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2