8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » General Yak   » Help with Elmo 912S

 - UBBFriend: Email this page to someone!    
Author Topic: Help with Elmo 912S
Steve Dalbec
Junior
Posts: 9
From: Denver, Colorado, US
Registered: Aug 2008


 - posted October 30, 2008 04:49 PM      Profile for Steve Dalbec   Email Steve Dalbec   Send New Private Message       Edit/Delete Post 
Just picked up an Elmo 912S, and I was under the impression it could handle 8mm size reels, but it appears to only handle the larger super 8.

Now it could be I am missing some caps that would slip over the spindles to allow the smaller reel hole to be used.

Can anyone tell me if this unit was design for the smaller reels. I have the owners manual and it does not mention it, but does say it handles both 8 and super 8.

Steve

 |  IP: Logged

Steve Dalbec
Junior
Posts: 9
From: Denver, Colorado, US
Registered: Aug 2008


 - posted October 30, 2008 07:17 PM      Profile for Steve Dalbec   Email Steve Dalbec   Send New Private Message       Edit/Delete Post 
Moved this to a 8mm equipment section instead.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2