posted November 21, 2013 11:05 PM
If possible can anyone tell me if they have tried connecting the line outputs 1&2 (MONI) to an amplifier to play back stereo. I've heard it works but is it a low volume input to the amp. Sorry for the rush but I need to find out very soon. Thanks for any help. Garry.
From: Long Island, NY, USA
Registered: Jun 2003
posted November 22, 2013 08:24 AM
The signal itself is actually pretty clean. Then again being such low level it is more vulnerable to external noise.
The problem for me is my amp and projectors are located about 15 feet apart and changing the volume is such a pain in the butt I usually just use the monaural aux. out (which is controlled from the projector's volume knob...) instead.
I have my eye on this small mixer panel which should allow me to connect in the mono and stereo outputs of several projectors, have a basic graphic equalizer on each channel and volume control right with the machines.
-------------------- All I ask is a wide screen and a projector to light her by...