8mm Forum


Post New Topic  Post A Reply
my profile | my password | register | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » General Yak   » Washing Machine Motors Advice

 - UBBFriend: Email this page to someone!    
Author Topic: Washing Machine Motors Advice
Mark Todd
Film God

Posts: 3667
From: UK
Registered: Aug 2003


 - posted January 25, 2019 03:55 PM      Profile for Mark Todd   Email Mark Todd   Send New Private Message       Edit/Delete Post 
Hi I am on the point of buying a new washing machine, but as I suffer from Mild Asthma now I am wonderfing if I should buy one with a brushless motor.

Reading up on motors re ariel issues a few years ago I read about Ozone that hangs about, not so good for the lungs, and is produced by sparking motors.

Does`nt seem to be an issue in projectors too much but its a serious motor on a washing machine, I wash about 2/3 times a day and the cycles are 2/3 hours each.

So I`m thinking I should maybe pay a little more for a inverter/brushless one ?

Any thoughts please as plenty of people on here far more in the know than me.

Thanks Mark.

PS I`ve seen a cracking machine with a full all issues 5 years guarantee and also a choose more water level I really like but it has a std brushed motor for £255 delivered and the old one taken away. Very tempting.

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5447
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted January 26, 2019 10:51 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Mark
It seems that brushless motors in washing machines may give the machine a longer life.
https://www.beko.co.uk/lifestyle/appliances-with-prosmart-inverter-motor-technology
There are washing powders/liquids designed to be used by asthma sufferers.
https://inthewash.co.uk/laundry-and-ironing/best-hypoallergenic-laundry-detergents-uk/

--------------------
Maurice

 |  IP: Logged

Phil Murat
Jedi Master Film Handler

Posts: 597
From: Villeneuve St Georges, France
Registered: Dec 2015


 - posted January 26, 2019 11:47 AM      Profile for Phil Murat   Email Phil Murat   Send New Private Message       Edit/Delete Post 
Hi Mark,
Brushless motors are much more reliable than brushed classical ones.
Nothing to compare.........
For exemple , hard disk in your computer is fitted with a brushless motor.
Lightweight, smaller, step by step possible, ..... this is the future right now.
This is used on small planes , scale models, too.

 |  IP: Logged

Tom Photiou
Film God

Posts: 4620
From: Plymouth U.K
Registered: Dec 2003


 - posted January 26, 2019 12:27 PM      Profile for Tom Photiou   Email Tom Photiou   Send New Private Message       Edit/Delete Post 
A spooky thread this one(especialy for a film forum [Wink] )
Mark i have in the last week bought a superb zanusi lindo 300 and it has the latest brushless motor. They work with magnets and are virtualy silent until they spin but yes definatly tons better, smoother and soooooo quite.

 |  IP: Logged

Mark Todd
Film God

Posts: 3667
From: UK
Registered: Aug 2003


 - posted January 26, 2019 04:46 PM      Profile for Mark Todd   Email Mark Todd   Send New Private Message       Edit/Delete Post 
Hi thank you all.

I think its the way to go. Brushless.

I`ll just nip and look those up, thank you Tom.

Found that model and it says it does extra water too.

Anyway many Thanks Tom, they sound good.

Best Mark.

[ January 27, 2019, 03:22 AM: Message edited by: Mark Todd ]

 |  IP: Logged



All times are Central  
Post New Topic  Post A Reply Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2010 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2