Clinton Hunt
Jedi Master Film Handler
Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010
|
posted February 07, 2014 07:13 PM
Hi all,
I have finally got around to setting up one of my Pathescope Ace 9.5mm , I have 2 - 0ne is hand-cranked and the other has an attached motor.
It is the hand-cranked one that is now up and running,very small picture (approx 6in) and a bit dull too, I am going to upgrade the lamp to give a brighter and bigger pic soon-ish.
What a mission to use, how did they manage it way-back-then!!!!!
I had to start cranking the handle while plugging in the lamp and then try and focus!!!!!!
I was very pleased with the results thou.
I ran a 100ft film and that was a very tiring job *haha* and then rewinding the film was a mission! How is that meant to be done?
I am next going to give the motor driven one a clean then give it a run.
--------------------
Cheers from me in New Zealand :-)
| IP: Logged
|
UBBFriend: Email this page to someone!
Printer-friendly view of this topic
