8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 9.5mm Forum   » Just got a Pathescope Gem 9.5mm projector

 - UBBFriend: Email this page to someone!    
Author Topic: Just got a Pathescope Gem 9.5mm projector
Clinton Hunt
Jedi Master Film Handler

Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010


 - posted November 26, 2015 10:40 PM      Profile for Clinton Hunt   Author's Homepage     Send New Private Message       Edit/Delete Post 
Hi all,
I just got one of these beauties, the motor isn't turning but that's ok as I also won a 16mm version which my bro-in-law got working for me!
Nice projectors to look at and have in my collection [Smile]

--------------------
Cheers from me in New Zealand :-)

 |  IP: Logged

Clinton Hunt
Jedi Master Film Handler

Posts: 845
From: Waharoa,North Island,New Zealand
Registered: May 2010


 - posted May 27, 2017 07:13 AM      Profile for Clinton Hunt   Author's Homepage     Send New Private Message       Edit/Delete Post 
Well it's been a year and a half and I decided to revisit this projector,it rewinds ok,but when projecting the cogs aren't moving.
I've undone lots of screws and it is basically 2 main sections to pull it apart.
The rewind relies on 2 cogs joining together,does the forward projecting use belts?
It's become too late at night to carry on so I will pull it apart again during the day,surely it won't be too difficult to see the problem?!?!?

--------------------
Cheers from me in New Zealand :-)

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2