8mm Forum: Sprocket wanted

»	8mm Forum » 9.5mm for sale/trade/wanted » Sprocket wanted

UBBFriend: Email this page to someone!

Author

Topic: Sprocket wanted

Martin Jones
Phenomenal Film Handler

Posts: 1269
From: Thetford , Norfolk,England
Registered: May 2008

posted September 09, 2014 05:49 AM

I'm looking for 9.5mm sprockets with 16 teeth in good condition. Have you anything that meets this requirement?
Either with or without a`spindle: please state bore if without, or spindle diameter and free length if with.
Martin

--------------------
Retired TV Service Engineer
Ongoing interest in Telecine....

| IP: Logged

Richard C Patchett
Master Film Handler

Posts: 424
From: Flint Mi 48506
Registered: Dec 2007

posted September 09, 2014 09:56 AM

Greetings Martin
A little confusing
Do you need both
16mm and a 9.5 ?
RC

--------------------
RC’s Classic Collection
16 mm Parts & Service
Elmo, Eiki, Bell & Howell +
http://www.rcsclassic16mm.com/

| IP: Logged

Martin Jones
Phenomenal Film Handler

Posts: 1269
From: Thetford , Norfolk,England
Registered: May 2008

posted September 09, 2014 11:04 AM

Yes.... 9.5 and 16 and Reg 8 and Super 8.... all 16 tooth.

--------------------
Retired TV Service Engineer
Ongoing interest in Telecine....

| IP: Logged

Terry Sills
Phenomenal Film Handler

Posts: 1423
From: Weymouth,Dorset,England
Registered: Oct 2012

posted September 11, 2014 01:05 PM

Martin
I think everyone would like to know what your project is! Sounds intriguing. Why don't you enlighten us?

| IP: Logged

Dominique De Bast
Film God

Posts: 4486
From: Brussels, Belgium
Registered: Jun 2013

posted September 13, 2014 02:18 PM

I am, indeed, curious, too.

--------------------
Dominique

| IP: Logged

Ken Finch
Jedi Master Film Handler

Posts: 543
From: Herne Bay, Kent. U.K.
Registered: Oct 2011

posted October 04, 2014 09:31 AM

Are'nt we all!! Ken Finch. [Razz]

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2