8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » 230 or 110 volt

 - UBBFriend: Email this page to someone!    
Author Topic: 230 or 110 volt
David Park
Master Film Handler

Posts: 346
From: UK
Registered: Nov 2003


 - posted January 21, 2004 01:26 AM      Profile for David Park   Email David Park   Send New Private Message       Edit/Delete Post 
I'm in UK, and usual voltage here and Europe is 230v.
I do believe that you in USA/Canada can have 110/115 volts.
If I buy a Elmo ST1200 for an example from USA/Canada do I run the risk of it being unsuitable for 230 volt?
If anyone in Uk got a 110v machine did you buy a convertor for 230v, at what cost if so.
Thanks,David

--------------------
Regards,
David

 |  IP: Logged

Trevor Adams
Jedi Master Film Handler

Posts: 763
From: Auckland,New Zealand
Registered: Jun 2003


 - posted January 21, 2004 04:36 AM      Profile for Trevor Adams   Author's Homepage     Send New Private Message       Edit/Delete Post 
You set the voltage on the projector.Trev

--------------------
Trevor

 |  IP: Logged

Tony Milman
Phenomenal Film Handler

Posts: 1336
From: United Kingdom
Registered: Jun 2003


 - posted January 21, 2004 08:08 AM      Profile for Tony Milman   Author's Homepage   Email Tony Milman   Send New Private Message       Edit/Delete Post 
I checked with a chap in the US and he said that it was a 110v model only- i.e. had no voltage upgrade to 220/240v. I am not sure if this is right but if it was then yes you would need a step down transformer. In the UK these start at around £40 but the key thing is getting one that can supply the right current I think. At 240V a 24v 200W lamp pulls just short of10amps of current I believe (formula Amps x Volts = Watts)so your transformer needs to be able to handle the pull on it.

The more electrically minded will be able to confirm if I am right or not.

Unless you have access to a good stepdown 110 v transformer you are best to stick with a multi voltage model./

Tony

--------------------
Tony

 |  IP: Logged

David Park
Master Film Handler

Posts: 346
From: UK
Registered: Nov 2003


 - posted January 21, 2004 09:14 AM      Profile for David Park   Email David Park   Send New Private Message       Edit/Delete Post 
Trevor, yes but do ALL Elmo St1200 that have 110 selection also have 230v selection?
Thanks
David

--------------------
Regards,
David

 |  IP: Logged

Mikael Sundstrom
Junior
Posts: 17
From: Uppsala, Sweden
Registered: Jan 2004


 - posted January 21, 2004 02:48 PM      Profile for Mikael Sundstrom   Email Mikael Sundstrom   Send New Private Message       Edit/Delete Post 
My elmo is only 220 volts. I think there are both single and multivoltage versions. Best thing is to ask the seller what his projector is. The wattage on the 220 version anyway is 450W. So you'd have to get a converter capable of outputting that. At least.
I´m no expert, don´t pound me if I´m wrong.

 |  IP: Logged

Tony Milman
Phenomenal Film Handler

Posts: 1336
From: United Kingdom
Registered: Jun 2003


 - posted January 21, 2004 03:16 PM      Profile for Tony Milman   Author's Homepage   Email Tony Milman   Send New Private Message       Edit/Delete Post 
Mikael,

I have elmo's that either have adjustment via a small "plug" that you can lift up and select from a series of voltages and I also have them without this. However, on the ones without the easily adjustable voltage plug, the transformer does have soldered connections (three of them) which can be used for 220V, 230V and 240V respectively. You obviously solder the connecting wire to the correct terminal to suit your voltage.

The terminals I think are labelled P1, P2 and P3 respectively.

Does your projector have this facility or are you saying that it is only a 220v model and can't be changed?

Tony

--------------------
Tony

 |  IP: Logged

Chris Quinn
Master Film Handler

Posts: 372
From: England, Bedfordshire.
Registered: Nov 2003


 - posted January 21, 2004 03:25 PM      Profile for Chris Quinn   Email Chris Quinn   Send New Private Message       Edit/Delete Post 
Hi David,
First there are multi voltage and set ones being either 230volts or the 110/115volt. i have two ST1200s and both are multi. This is easy to tell, at the back of the machine is a viewing glass to tell which voltage it is set on, you can take the back of the projector to turn it to the voltage you require.in my opinion it is not worth buying a machine from abroad that does not have this option to change, you should be able to fine one this side of the pond easily enough. Hope this helps. Chris.

--------------------
The other half thinks i'm up to something. Shes right of course.

 |  IP: Logged

David Park
Master Film Handler

Posts: 346
From: UK
Registered: Nov 2003


 - posted January 22, 2004 05:12 AM      Profile for David Park   Email David Park   Send New Private Message       Edit/Delete Post 
Thanks for your replies.
Well I let it go, did not think it was worth risking getting a 110v only.
Also I asked the Ebay seller the carriage to Uk, he gave me weight, 17kg, and a link to Canada PO to get a quote. The PO were unable to give me a quote due to unknown size of parcel.
Interestingly the final bid was very low compared with other auctions, US dollar 103.5 / Uk £56.50. So maybe others were put off by this voltage.

--------------------
Regards,
David

 |  IP: Logged

Kevin Faulkner
Film God

Posts: 4071
From: Essex UK
Registered: Jun 2003


 - posted January 22, 2004 06:40 AM      Profile for Kevin Faulkner         Edit/Delete Post 
My goodness Tony you have been taking this all in.

To clarify:
There a 4 versions of each machine normally.

1, Multi voltage version 110 - 240V
2, Multi voltage version which includes 250V for some countries
3, Fixed 220V version which can be changed inside on the tranformer solder tag, P1 = 220, P2 = 230 & P3 = 240V
4, Fixed 120V version which can be changed inside on the tranformer solder tag, P1 = 110, P2 = 115 & P3 = 120V

There are probably some other version lurking about too but these are the ones I have come accross.

Kev

--------------------
GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.

 |  IP: Logged

Tim Christian
Expert Film Handler

Posts: 219
From: Norfolk, UK
Registered: Jun 2003


 - posted January 22, 2004 11:41 AM      Profile for Tim Christian   Author's Homepage     Send New Private Message       Edit/Delete Post 
It is also worth finding out that it is suitable for 50 Hz as well as 60 Hz. Some projectors have dual drive pulleys to allow for the frequency change. Some transformers may not like 50 Hz if they were spec'd for 60 Hz.

--------------------
Tim

 |  IP: Logged

Tony Milman
Phenomenal Film Handler

Posts: 1336
From: United Kingdom
Registered: Jun 2003


 - posted January 22, 2004 12:22 PM      Profile for Tony Milman   Author's Homepage   Email Tony Milman   Send New Private Message       Edit/Delete Post 
Tim,

Is Europe on the same Hz as the UK?

David, apart from the electrical issues there are two other reasons for buying from Europe:-

1. No risk of Customs striking you for a shed load of cash
2. Carriage is much cheaper

Tony

--------------------
Tony

 |  IP: Logged

Kevin Faulkner
Film God

Posts: 4071
From: Essex UK
Registered: Jun 2003


 - posted January 22, 2004 06:52 PM      Profile for Kevin Faulkner         Edit/Delete Post 
Yes Tony, Europe uses 50Hz as does the UK and of course the US has 60HZ.
Most projectors which use electronic speed control will happily run on either 50 or 60 without any need for change. The GS comes into this category. Machines which run with synchronous motors such as the ST1200 series will have to have the pulleys changed over as they run on ac locked to the mains frequency.

Kev.

--------------------
GS1200 Xenon with Elmo 1.0...great combo along with a 16-CL Xenon for that super bright white light.

 |  IP: Logged

Alan Rik
Film God

Posts: 2211
From: New York City, NY, USA
Registered: Jun 2003


 - posted January 23, 2004 12:04 AM      Profile for Alan Rik   Email Alan Rik   Send New Private Message       Edit/Delete Post 
I once had the displeasure to purchase a Bauer T600 from a gentlemen in Germany. Partly my fault that I didn't ask if it was suitable for use in the US. I could switch the machine for the proper voltage but everyone sounded like a chipmunk. The gentlemen would not refund the monies saying it had been spent so I was forced to sell on Ebay. Not a bad story though.. I got my money back. But alas there was no cure for the chipmunk voices. I remember Derek from Derann posted on the website that I was looking for a US motor for the Bauer.
Great guy. Never did find the motor though.

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2