8mm Forum: Problem with Bauer T-610

»	8mm Forum » 8mm Forum » Problem with Bauer T-610

UBBFriend: Email this page to someone!

Author

Topic: Problem with Bauer T-610

Daniele Mattioli
Junior
Posts: 2
From: Italy
Registered: Feb 2004

posted July 27, 2004 04:41 AM

Excused, I do not write correctly in English ;-)

He is not possible adjust the frame, is possible setting the claw or the claw and "eccentrico" (I do not know the word in English) is broken?

TankYou

--------------------
Daniele

| IP: Logged

Mark Todd
Film God

Posts: 3846
From: UK
Registered: Aug 2003

posted July 27, 2004 05:06 AM

Hi Daniele, not quite sure what the problem is but I do know that on Bauers after a lot of use the claw can wear quite a bit, though usully after a good bit of use, maybe 10 years as main machine, depending how much you watch.
If the claw and cam are worn, I beleive you can get the parts from Germany but the extra cost of labour if you can not do it yourself usually means its more practical and easy and cheaper to look out for another little used machine and keep the one with the worn claw and cam for spares.
Not sure if thats the prob, hope you can sort it.
we have some Italian collectors on here maybe you can say it in Italien and they can get back to you or translate for the English speakers.
Best wishes Mark.

| IP: Logged

Daniele Mattioli
Junior
Posts: 2
From: Italy
Registered: Feb 2004

posted July 27, 2004 09:28 AM

thanks, Mark [Smile]

--------------------
Daniele

| IP: Logged

Ugo Grassi
Jedi Master Film Handler

Posts: 506
From: Avellino (Italy)
Registered: Dec 2003

posted July 27, 2004 11:07 AM

Dear Daniele,
send me a mail; I'll answer to your questions. Of course you can write in italian.
ugo.grassi@email.it
bye

--------------------
Bye
Ugo

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2