8mm Forum


  
my profile | my password | register | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Canon PS-1000 Question

 - UBBFriend: Email this page to someone!    
Author Topic: Canon PS-1000 Question
Sonny Young
Junior
Posts: 15
From: Astoria, NY, USA
Registered: Nov 2003


 - posted November 16, 2008 12:25 AM      Profile for Sonny Young     Send New Private Message       Edit/Delete Post 
This question is a long shot. The frame line adjuster is not moving the line out of the frame. The line is visible about a third of the way down. Is there an adjustment inside the projector for this? I've never seen so many moving parts in such a small machine, but I can find anything that does the trick. Any help would be appreciated.

 |  IP: Logged

Bill Brandenstein
Phenomenal Film Handler

Posts: 1632
From: California
Registered: Aug 2007


 - posted November 16, 2008 10:58 PM      Profile for Bill Brandenstein   Email Bill Brandenstein   Send New Private Message       Edit/Delete Post 
I have the same problem. When the machine was new, it was generally possible to get most prints to frame correctly, though at the time I noticed that it would tend to place lower than other projectors.

Granted, there is less than 100 hours on this machine. Still, the framing is getting worse and worse, and it is rare to get a frame line to not hang down any more.

I know of no solution, nor anyone who currently services these. So add my voice to the noise!

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2