8mm Forum: Eumig spare part needed for on-off switch

»	8mm Forum » 8mm Forum » Eumig spare part needed for on-off switch

UBBFriend: Email this page to someone!

Author

Topic: Eumig spare part needed for on-off switch

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004

posted August 11, 2005 02:47 PM

I've just obtained a Eumig 824 Sonomatic and although it's in good overall condition, the black plastic piece that should be on the end of the on-off switch is missing. It's not exactly crucial but as I'd like to replace this, I wondered if anyone had one they would sell, maybe from a broken down 824 or similar model? Alternatively, a suggested possible source of such spares would also be appreciated.

Adrian

--------------------
Adrian Winchester

| IP: Logged

Andreas Eggeling
Master Film Handler

Posts: 467
From: R.I.P.
Registered: Aug 2003

posted August 11, 2005 03:34 PM

Adrian,

could you upload an image of the wanted spare part?

Andreas

| IP: Logged

Kevin Clark
Jedi Master Film Handler

Posts: 978
From: Bapchild, Kent, UK
Registered: May 2004

posted August 11, 2005 03:48 PM

Hello Adrian
I have one here you are welcome to FOC, let me know your address by email or PM and I will post it to you without delay.
Kevin

| IP: Logged

Adrian Winchester
Film God

Posts: 2941
From: Croydon, London, UK
Registered: Aug 2004

posted August 12, 2005 08:16 AM

Many thanks to Kevin for coming to my rescue with this. With luck, I'll have the part tomorrow. Thanks also to Andreas for trying to help.

It all goes to show what a great crowd of people this board attracts!

Adrian

--------------------
Adrian Winchester

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2