posted April 02, 2007 06:11 PM
My ST600 has been acting up lately.The film goes in the projector alright,though the gate ok and then just before it goes though the sound head,it bunches up.There is a little copper tab before the sound head that is bent upward.I believe that what is causing it.Shouldn't that tab be flush with the film path.I hope I explained this ok.Can anyone help me.Thanks
I have a picture but I can't figure out how to upload it.
Kev I finally figured what was wrong.On a couple of films I had a poor trim on the end of the film feeding into the projector and that was causing the jam by the sound head.I left the side cover down and follow the film and you could see it jamming.
[ April 03, 2007, 11:10 AM: Message edited by: Bob Pucci ]