8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Problematic fuse on Bauer T502

- UBBFriend: Email this page to someone!    
Author Topic: Problematic fuse on Bauer T502
Pedro Munyoz
Junior
Posts: 11
From: Spain
Registered: Dec 2007

- posted January 16, 2008 03:51 PM      Profile for Pedro Munyoz   Email Pedro Munyoz   Send New Private Message       Edit/Delete Post 
Hi!
I've just purchased a Bauer T502 from ebay and the sound doesn't work (although the image is fine). The fuse that transmits the power to the sound system was out, so I changed it twice and it went out the two times. Does anyone know what could be the cause for this power overcharge?

Thank you

 |  IP: Logged
Jim Carlile
Film Handler

Posts: 95
From: Burbank, California, USA
Registered: Apr 2007

- posted January 18, 2008 09:42 PM      Profile for Jim Carlile   Email Jim Carlile   Send New Private Message       Edit/Delete Post 
Try using a slow-blow fuse. I think that's the problem.

If the machine has been idle for years, the capacitors are probably acting up. You might have to go through a few fuses until things load up and stabilize.

 |  IP: Logged


All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
- Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2