Robert Tucker
Jedi Master Film Handler
Posts: 688
From: Essex, UK
Registered: May 2005
|
posted October 01, 2008 10:54 AM
I have a small problem with a Canon P400 projector which I recently acquired. I had to replace the belt, which broke. But it seems when I turn the control to the off position. The motor and belt runs but that's all? When I turn the control knob to fwrd/rvrse then Lamp nothing happens which is really strange.
Could it be the transformer that could be the culprit as I have never come across this before!?! It is really baffling me!
Any help would be much appreciated!
Cheers!
| IP: Logged
|