8mm Forum: slipping belt Elmo ST1200

»	8mm Forum » 8mm Forum » slipping belt Elmo ST1200

UBBFriend: Email this page to someone!

Author

Topic: slipping belt Elmo ST1200

Jeroen van Ooijen
Jedi Master Film Handler

Posts: 823
From: The Netherlands
Registered: Mar 2008

posted January 03, 2010 01:03 PM

I have a question,what can i do with the belts that they not slipping.
Everytime i run my projector i must push the button 24FPS to 18FPS and back,then he runs very slowly because the belt is to dry or th slippy i think.
What can i fix this problem that my projector can take his grip on the belts.

Thanks [Big Grin]

--------------------
Super8 that's the greatest hobby in my life,i was 9 to have my first viewer from GAF.

| IP: Logged

Christian Bjorgen
Jedi Master Film Handler

Posts: 996
From: Kvinnherad, Norway
Registered: Oct 2009

posted January 03, 2010 01:05 PM

Clean all the involved parts with rubbing alcohol, then clean the belts aswell to remove all grease/oil.

--------------------
Well who’s on first? Yeah. Go ahead and tell me. Who. The guy on first. Who. The guy playin’ first base. Who. The guy on first. Who is on first! What are you askin’ me for? I’m askin’ you!

| IP: Logged

Jeroen van Ooijen
Jedi Master Film Handler

Posts: 823
From: The Netherlands
Registered: Mar 2008

posted January 03, 2010 05:13 PM

Thank you! [Wink]

--------------------
Super8 that's the greatest hobby in my life,i was 9 to have my first viewer from GAF.

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2