Author
|
Topic: Bauer T610 aux in
|
|
Maurizio Di Cintio
Jedi Master Film Handler
Posts: 977
From: Ortona, Italy
Registered: Jan 2004
|
posted January 14, 2012 12:23 PM
Hi, Jeroen.
You can either use the second or the third DIN socket (counted from the right hand side). If you want to use the second one (marked with a sort of "Q"), the relevant pins for input from the point of view of the observer, are: first pin (top left): left ch; the pin placed below this one is the right ch and the next one is the ground; respectively, they are pins No. 3, 5 and 2.
If planning to use the third DIN socket (marked with a sort of "< >", meaning input/output), you have to use the top right pin for the left ch, the pin placed below for the right ch, and the next one for the ground. Respectively they are pins No. 1, 4, 2.
Sorry, I don't have a scanner with me to visually give you these information, but I think the above should suffice. Good luck.
-------------------- Maurizio
| IP: Logged
|
|
|
|