8mm Forum


  
my profile | my password | search | faq | register | forum home
  next oldest topic   next newest topic
» 8mm Forum   » 8mm Forum   » Bell and Howell 456Z

 - UBBFriend: Email this page to someone!    
Author Topic: Bell and Howell 456Z
Craig Jarvis
Film Handler

Posts: 44
From: Saskatoon, SK. Canada
Registered: Aug 2013


 - posted August 02, 2013 08:46 PM      Profile for Craig Jarvis   Author's Homepage   Email Craig Jarvis   Send New Private Message       Edit/Delete Post 
Hi, new to this forum and pretty much a film novice. I run a transfer business and had to get a projector for the occasional super 8 and 8mm. I got this Bell and Howell dual format projector. Bought sight unseen. First off I noticed the auto threading tire was melted off the capstan, not problem, I'll just manually thread the tape, order the tire, no biggie. Next I try and focus with the knob identified as "focus" in the manual. Zero, nothing happens, makes it unusable. Fuzzy outlines etc. My question, how do you access the inner lens to free this up? Or is it even possible? is there another cause. Thanks. Craig

--------------------
J. Craig Jarvis
Vital Transfers Canada

 |  IP: Logged

Pasquale DAlessio
Film God

Posts: 3523
From: Bristol,RI, USA
Registered: May 2010


 - posted August 02, 2013 09:07 PM      Profile for Pasquale DAlessio     Send New Private Message       Edit/Delete Post 
WELCOME TO THE FORUM CRAIG!!!!

Can that lens be turned by hand?

PatD

 |  IP: Logged

Craig Jarvis
Film Handler

Posts: 44
From: Saskatoon, SK. Canada
Registered: Aug 2013


 - posted August 02, 2013 09:10 PM      Profile for Craig Jarvis   Author's Homepage   Email Craig Jarvis   Send New Private Message       Edit/Delete Post 
Hi. nice to meet ya! No, I tried spinning the actual lens at the base but no go. I didn't want to be too aggressive in case it "doesn't turn". hold on! I went and tried again just now and gave it a little more torque. Came out in my hand. Was gummy from melted autoload tire. [Smile] now what?

--------------------
J. Craig Jarvis
Vital Transfers Canada

 |  IP: Logged

Maurice Leakey
Film God

Posts: 5895
From: Bristol. United Kingdom
Registered: Oct 2007


 - posted August 03, 2013 02:41 AM      Profile for Maurice Leakey   Email Maurice Leakey   Send New Private Message       Edit/Delete Post 
Craig
I believe this projector has only a fixed single speed. If you are considering video transfer you will probably need a projector with variable speed.

--------------------
Maurice

 |  IP: Logged

Craig Jarvis
Film Handler

Posts: 44
From: Saskatoon, SK. Canada
Registered: Aug 2013


 - posted August 03, 2013 04:13 PM      Profile for Craig Jarvis   Author's Homepage   Email Craig Jarvis   Send New Private Message       Edit/Delete Post 
Thanks for your replies. I did get the focus to work. I think you may be right. A variable speed is likely my best friend for transfer as I need to reduce the flicker. Right now if looks like the Zappruder film of Kennedy! Do you think a Eumig Mark 8 will be good enough for my purposes? Thanks again. [Smile]

--------------------
J. Craig Jarvis
Vital Transfers Canada

 |  IP: Logged



All times are Central  
   Close Topic    Move Topic    Delete Topic    next oldest topic   next newest topic
 - Printer-friendly view of this topic
Hop To:

Visit www.film-tech.com for free equipment manual downloads. Copyright 2003-2019 Film-Tech Cinema Systems LLC

Powered by Infopop Corporation
UBB.classicTM 6.3.1.2