8mm Forum: Eumig 802 and 804 sprockets

»	8mm Forum » 8mm Forum » Eumig 802 and 804 sprockets

UBBFriend: Email this page to someone!

Author

Topic: Eumig 802 and 804 sprockets

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted December 12, 2015 07:26 AM

An info, help! [Wink]

The two sprocket for Super 8 (which are placed above the wheels for Standard 8) of Eumig 804 D are the same or are compatible of Super 8 same sprockets of Eumig 802 D?
Thank you!

| IP: Logged

Evan Samaras
Jedi Master Film Handler

Posts: 513
From: Queens, NY, USA
Registered: Oct 2015

posted December 12, 2015 07:44 PM

May not apply to you but I was told the 807D parts are different than their predecessors. I myself am looking for the standard eight parts but don't think they are ever sold separately, at least I haven't seen any

--------------------
...When there's no more room in hell, the dead will walk the Earth...

| IP: Logged

Luigi Castellitto
Jedi Master Film Handler

Posts: 715
From: Campobasso, Italy
Registered: Jun 2013

posted December 13, 2015 08:18 AM

Yes, Evan, Eumig 807 D have the different Eumig mode of change format: changing both plates and not only one, and the sprockets are replaced, does not put one above the other.

While the two projectors that I mentioned, work with the other method. [Smile]

| IP: Logged

All times are Central

Printer-friendly view of this topic

UBB.classic^TM 6.3.1.2